@ -1,7 +1,7 @@
#!/bin/bash
#!/bin/env bash
# Add CR2 tags: Baseline, Subject (to distinguish Single & Dual ISOs)
# Copyright (C) 2017 Pekka Helenius
# Copyright (C) 2017,2023 Pekka Helenius
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
@ -19,501 +19,502 @@
#
###############################################
# File system check
# We don't allow writing to SD card.
#Sed is here to remove any trailing spaces and crap like blank lines
INPUT_FILESYSTEM = $( df -h " ${ 1 } " | awk -F ' ' 'FNR> 1 {print $1}' | grep -i -E "/dev/sd?|/dev/hd?|?rewritefs|?tmpfs|/dev/nvme?" | sed '/^\s*$/d' | wc -l)
if [ [ " ${ INPUT_FILESYSTEM } " -eq 0 ] ] ; then #if input file (first file printed in bash) filesystem does not start with /dev/sdX
kdialog --error "Image(s) are in a SD Card. Please move them your local or external storage and try again."
exit
fi
################################################################################################
#We get the directory just from the first filename. Pwd should be easier, but bugged, so...
# We get the directory just from the first filename.
INPUT_DIR = $( dirname " ${ 1 } " )
DIR_BASENAME = $( echo " ${ INPUT_DIR } " | rev | cut -d/ -f 1 | rev)
#Camera resolution in pixels (absolute limit, we can't exceed these pixel values!)
# Camera resolution in pixels (absolute limit, we can't exceed these pixel values!)
C5DMK3_WIDTH = 5796
C5DMK3_HEIGHT = 3870
# In a case or emergency (can't open a picture etc), revert this values to 5760 x 3840
# In a case or emergency (can't open a picture etc), revert these values to 5760 x 3840.
################################################################################################
####PROGRESSBAR STUFF - BEGIN
LABELTEXT = 'Processing RAW images...'
# PROGRESSBAR CODE - BEGIN
LABELTEXT = "Processing RAW images..."
numargs = $# # Number of all files
tics = 100 # Percentage tics
inc = 0 # Current file number
mltp = 1000 # Percentage multiplier for bash
tics = 100 # Percentage tics
inc = 0 # Current file number
mltp = 1000 # Percentage multiplier for bash
dbusRef = $(
kdialog \
--title " EXIF Tags (folder: ${ DIR_BASENAME } ) " \
--progressbar " $LABELTEXT " " ${ tics } "
)
dbusRef = $( kdialog --title " EXIF Tags (folder: ${ DIR_BASENAME } ) " --progressbar " $LABELTEXT " $tics )
qdbus $dbusRef showCancelButton true
####PROGRESSBAR STUFF - END
# PROGRESSBAR CODE - END
while [ [ $# -gt 0 ] ] && [ [ $( qdbus $dbusRef wasCancelled) = = "false" ] ] ; do
while \
[ [ $# -gt 0 ] ] && \
[ [ $( qdbus $dbusRef wasCancelled) = = "false" ] ]
do
################################################################
# Values that change during the while loop (differ from file to file)
INPUT = " ${ 1 } "
# Values that change during the while loop (differ from file to file)
INPUT_BASENAME = $( basename " ${ INPUT } " | cut -f 1 -d '.' )
INPUT_EXTENSION = $( echo $( basename " ${ INPUT } " | cut -f 2 -d '.' | sed '/^\s*$/d' ) ) #Get the correct file extension for an input file (so the new one will use the same)
INPUT = " ${ 1 } "
SUBJECT = $( exiftool " ${ INPUT } " | grep "Subject" )
SUBJECT_SINGLEISO = $( exiftool " ${ INPUT } " | grep "Subject" | grep "Single ISO" )
SUBJECT_DUALISO = $( exiftool " ${ INPUT } " | grep "Subject" | grep "Dual ISO" )
INPUT_BASENAME = $( basename " ${ INPUT } " | cut -f 1 -d '.' )
#This is just for compatibility
SUBJECT_DUALISO_OLD = $( exiftool " ${ INPUT } " | grep "Subject" | grep "Dual-ISO" )
# Get the correct file extension for an input file, to be used for the new file.
INPUT_EXTENSION = $( echo $( basename" ${ INPUT } " | cut -f 2 -d '.' | sed -e '/^\s*$/d' -e 's/\(.*\)/\U\1/' ) )
BASELINES = $( exiftool " ${ INPUT } " | grep "Baseline Exposure" )
SUBJECT = $( exiftool " ${ INPUT } " | grep "Subject" )
SUBJECT_SINGLEISO = $( exiftool " ${ INPUT } " | grep "Subject" | grep "Single ISO" )
SUBJECT_DUALISO = $( exiftool " ${ INPUT } " | grep "Subject" | grep "Dual ISO" )
C5DMK3_CHECK = $( exiftool " ${ INPUT } " | grep -i "5D Mark III" | wc -l)
CROPHEIGHT_CHECK_VALUE = $( echo -n $( " ${ INPUT } " | grep -i "Cropped Image Height" | sed 's/[^0-9]*//g' ) )
# This is just for compatibility.
SUBJECT_DUALISO_OLD = $( exiftool " ${ INPUT } " | grep "Subject" | grep "Dual-ISO" )
ISO_VALUE = $( echo -n $( exiftool " ${ INPUT } " | grep "Recommended Exposure Index" | grep -v "Sensitivity Type" | sed 's/[^0-9]*//g' ) )
BASELINES = $( exiftool " ${ INPUT } " | grep "Baseline Exposure" )
################################################################
# FIRST CHECK FOR INDIVIDUAL FILE
################################
# CR2 FILES
#
# Input file is CR2 or cr2
if [ [ " ${ INPUT_EXTENSION } " = = "CR2" ] ] || [ [ " ${ INPUT_EXTENSION } " = = "cr2" ] ] ; then
C5DMK3_CHECK = $( exiftool " ${ INPUT } " | grep -i "5D Mark III" | wc -l)
CROPHEIGHT_CHECK_VALUE = $( echo -n $( exiftool " ${ INPUT } " | grep -i "Cropped Image Height" | sed 's/[^0-9]*//g' ) )
###########
# Dual ISO - unprocessed CR2 (NOTE: THIS CHECK IS SLOW)
if [ [ $( cr2hdr --dry-run " ${ INPUT } " | grep "Interlaced ISO detected" | wc -l) = = 1 ] ] ; then # Test an input file for Dual ISO.
echo " ${ INPUT_BASENAME } : Dual ISO CR2 image. Skipping. "
IS_SINGLE_CR2 = false
ISO_VALUE = $( echo -n $( exiftool " ${ INPUT } " | grep "Recommended Exposure Index" | grep -v "Sensitivity Type" | sed 's/[^0-9]*//g' ) )
else
IS_SINGLE_CR2 = true
fi
if [ [ $IS_SINGLE_CR2 = = true ] ] ; then
###########
# Single ISO - CR2
# Subject Tag
#
if [ [ $( echo " ${ SUBJECT } " | sed '/^\s*$/d' | wc -l) = = 0 ] ] ; then
echo " ${ INPUT_BASENAME } : Add a new Subject tag. "
SUBJECT_TAG = 'Single ISO CR2'
PROCESS_SUBJECT = true
else
echo " ${ INPUT_BASENAME } is a Single ISO image and has a Subject tag already. "
PROCESS_SUBJECT = false
fi
# Baseline Tags
#
if [ [ $( echo " ${ BASELINES } " | sed '/^\s*$/d' | wc -l) = = 0 ] ] ; then
echo " ${ INPUT_BASENAME } : Add new Baseline tags. "
PROCESS_BASELINE = true
else
echo " ${ INPUT_BASENAME } : Baseline tags exist. Skipping. "
PROCESS_BASELINE = false
################################################################
fi
# FIRST CHECK FOR INDIVIDUAL FILE
if [ [ $CROPHEIGHT_CHECK_VALUE != $C5DMK3_HEIGHT ] ] ; then
################################
# CR2 FILES
#
# Input file is CR2 or cr2
echo " ${ INPUT_BASENAME } : New resolution, $C5DMK3_WIDTH x $C5DMK3_HEIGHT . "
PROCESS_SIZE = true
if [ [ " ${ INPUT_EXTENSION } " = = "CR2" ] ]
then
else
# Dual ISO - unprocessed CR2 (NOTE: THIS CHECK IS SLOW)
# Test an input file for Dual ISO.
if [ [ $( cr2hdr --dry-run " ${ INPUT } " | grep "Interlaced ISO detected" | wc -l) -eq 1 ] ]
then
echo " ${ INPUT_BASENAME } : Dual ISO CR2 image. Skipping. "
IS_SINGLE_CR2 = false
else
IS_SINGLE_CR2 = true
fi
echo " ${ INPUT_BASENAME } : Has correct resolution already. "
PROCESS_SIZE = false
# Single ISO - CR2
if [ [ " ${ IS_SINGLE_CR2 } " = = true ] ]
then
# Subject Tag
if [ [ $( echo " ${ SUBJECT } " | sed '/^\s*$/d' | wc -l) -eq 0 ] ]
then
echo " ${ INPUT_BASENAME } : Add a new Subject tag. "
SUBJECT_TAG = "Single ISO CR2"
PROCESS_SUBJECT = true
else
echo " ${ INPUT_BASENAME } is a Single ISO image and has a Subject tag already. "
PROCESS_SUBJECT = false
fi
# Baseline Tags
if [ [ $( echo " ${ BASELINES } " | sed '/^\s*$/d' | wc -l) -eq 0 ] ]
then
echo " ${ INPUT_BASENAME } : Add new Baseline tags. "
PROCESS_BASELINE = true
else
echo " ${ INPUT_BASENAME } : Baseline tags exist. Skipping. "
PROCESS_BASELINE = false
fi
# Image size
if [ [ " ${ CROPHEIGHT_CHECK_VALUE } " -ne " ${ C5DMK3_HEIGHT } " ] ]
then
echo " ${ INPUT_BASENAME } : New resolution, ${ C5DMK3_WIDTH } x ${ C5DMK3_HEIGHT } . "
PROCESS_SIZE = true
else
echo " ${ INPUT_BASENAME } : Has correct resolution already. "
PROCESS_SIZE = false
fi
fi
fi
fi
################################
# DNG FILES
#
# Input file is DNG or dng
################################
# DNG FILES
#
# Input file is DNG or dng
elif [ [ " ${ INPUT_EXTENSION } " = = "DNG" ] ] || [ [ " ${ INPUT_EXTENSION } " = = "dng" ] ] ; then
elif [ [ " ${ INPUT_EXTENSION } " = = "DNG" ] ]
then
###########
# DNG with missing Subject Tag
# DNG with missing Subject Tag
if [ [ $( echo " ${ SUBJECT } " | sed '/^\s*$/d' | wc -l) = = 0 ] ] ; then
if [ [ $( echo " ${ SUBJECT } " | sed '/^\s*$/d' | wc -l) -eq 0 ] ]
then
echo " ${ INPUT_BASENAME } : Add a new Subject tag. "
SUBJECT_TAG = 'Single ISO CR2'
PROCESS_SUBJECT = true
echo " ${ INPUT_BASENAME } : Add a new Subject tag. "
SUBJECT_TAG = "Single ISO CR2 "
PROCESS_SUBJECT = true
#We don't update size tags. See reason below.
#Baseline tags have already been written by Adobe converter.
PROCESS_SIZE = false
PROCESS_BASELINE = false
# We don't update size tags. See reason below.
# Baseline tags have already been written by Adobe converter.
PROCESS_SIZE = false
PROCESS_BASELINE = false
###########
# DNG with updated Subject Tag
# DNG with updated Subject Tag
elif [ [ $( echo " ${ SUBJECT_SINGLEISO } " | sed '/^\s*$/d' | wc -l) != 0 ] ] ; then
elif [ [ $( echo " ${ SUBJECT_SINGLEISO } " | sed '/^\s*$/d' | wc -l) -ne 0 ] ]
then
echo " ${ INPUT_BASENAME } : Subject tag exists. Skipping. "
PROCESS_SUBJECT = false
echo " ${ INPUT_BASENAME } : Subject tag exists. Skipping. "
PROCESS_SUBJECT = false
#We don't update size tags. See reason below.
#Baseline tags have already been written by Adobe converter.
PROCESS_SIZE = false
PROCESS_BASELINE = false
# We don't update size tags. See reason below.
# Baseline tags have already been written by Adobe converter.
PROCESS_SIZE = false
PROCESS_BASELINE = false
###########
# New Dual ISO - DNG
# New Dual ISO - DNG
elif [ [ $( echo " ${ SUBJECT_DUALISO } " | sed '/^\s*$/d' | wc -l) != 0 ] ] ; then
elif [ [ $( echo " ${ SUBJECT_DUALISO } " | sed '/^\s*$/d' | wc -l) -ne 0 ] ]
then
echo " ${ INPUT_BASENAME } : Dual ISO image with proper tags. Skipping. "
echo " ${ INPUT_BASENAME } : Dual ISO image with proper tags. Skipping. "
# Tags have already be written by updated cr2hdr.
PROCESS_SUBJECT = false
PROCESS_SIZE = false
PROCESS_BASELINE = false
# Tags have already be written by updated cr2hdr.
PROCESS_SUBJECT = false
PROCESS_SIZE = false
PROCESS_BASELINE = false
###########
# Old Dual ISO - DNG
elif [ [ $( echo " ${ SUBJECT_DUALISO_OLD } " | sed '/^\s*$/d' | wc -l) != 0 ] ] ; then
# Old Dual ISO - DNG
echo " ${ INPUT_BASENAME } : old Dual ISO image. Update Subject & Baseline tags. "
exiftool -xmp:subject= " ${ INPUT } " -overwrite_original #Clear old tag
elif [ [ $( echo " ${ SUBJECT_DUALISO_OLD } " | sed '/^\s*$/d' | wc -l) -ne 0 ] ]
then
PROCESS_SUBJECT = true
SUBJECT_TAG = 'Dual ISO DNG'
echo " ${ INPUT_BASENAME } : old Dual ISO image. Update Subject & Baseline tags. "
exiftool -xmp:subject= " ${ INPUT } " -overwrite_original #Clear old tag
PROCESS_SIZE = fals e
PROCESS_BASELINE = true #Old dual ISOs don't have this one.
PROCESS_SUBJECT = tru
SUBJECT_TAG = "Dual ISO DNG"
################################
PROCESS_SIZE = false
fi
# Old dual ISOs don't have this one.
PROCESS_BASELINE = true
fi
fi
################################################################
# Suffix for the new file name
# U = Uncropped (PROCESS_SIZE)
# S = Subject Tag (PROCESS_SUBJECT)
# B = Baseline Tags (PROCESS_BASELINE)
# false, false, false
if [ [ $PROCESS_SUBJECT = = false ] ] && [ [ $PROCESS_BASELINE = = false ] ] && [ [ $PROCESS_SIZE = = false ] ] ; then
#WRITENEWFILE=false
SUFFIX =
# true, true, true
elif [ [ $PROCESS_SUBJECT = = true ] ] && [ [ $PROCESS_BASELINE = = true ] ] && [ [ $PROCESS_SIZE = = true ] ] ; then
#WRITENEWFILE=true
SUFFIX = _USB
# Suffix for the new file name
# U = Uncropped (PROCESS_SIZE)
# S = Subject Tag (PROCESS_SUBJECT)
# B = Baseline Tags (PROCESS_BASELINE)
# false, false, false
if \
[ [ " ${ PROCESS_SUBJECT } " = = false ] ] && \
[ [ " ${ PROCESS_BASELINE } " = = false ] ] && \
[ [ " ${ PROCESS_SIZE } " = = false ] ]
then
SUFFIX =
# true, true, true
elif \
[ [ " ${ PROCESS_SUBJECT } " = = true ] ] && \
[ [ " ${ PROCESS_BASELINE } " = = true ] ] && \
[ [ " ${ PROCESS_SIZE } " = = true ] ]
then
SUFFIX = _USB
# true, true, false
elif \
[ [ " ${ PROCESS_SUBJECT } " = = true ] ] && \
[ [ " ${ PROCESS_BASELINE } " = = true ] ] && \
[ [ " ${ PROCESS_SIZE } " = = false ] ]
then
SUFFIX = _SB
# false, true, true
elif \
[ [ " ${ PROCESS_SUBJECT } " = = false ] ] && \
[ [ " ${ PROCESS_BASELINE } " = = true ] ] && \
[ [ " ${ PROCESS_SIZE } " = = true ] ]
then
SUFFIX = _UB
# true, false, true
elif \
[ [ " ${ PROCESS_SUBJECT } " = = true ] ] && \
[ [ " ${ PROCESS_BASELINE } " = = false ] ] && \
[ [ " ${ PROCESS_SIZE } " = = true ] ]
then
SUFFIX = _US
# false, true, false
elif \
[ [ " ${ PROCESS_SUBJECT } " = = false ] ] && \
[ [ " ${ PROCESS_BASELINE } " = = true ] ] && \
[ [ " ${ PROCESS_SIZE } " = = false ] ]
then
SUFFIX = _B
# true, false, false
elif \
[ [ " ${ PROCESS_SUBJECT } " = = true ] ] && \
[ [ " ${ PROCESS_BASELINE } " = = false ] ] && \
[ [ " ${ PROCESS_SIZE } " = = false ] ]
then
SUFFIX = _S
# false, false, true
elif \
[ [ " ${ PROCESS_SUBJECT } " = = false ] ] && \
[ [ " ${ PROCESS_BASELINE } " = = false ] ] && \
[ [ " ${ PROCESS_SIZE } " = = true ] ]
then
SUFFIX = _U
fi
# true, true, false
elif [ [ $PROCESS_SUBJECT = = true ] ] && [ [ $PROCESS_BASELINE = = true ] ] && [ [ $PROCESS_SIZE = = false ] ] ; then
#WRITENEWFILE=true
SUFFIX = _SB
################################################################
# false, true, true
elif [ [ $PROCESS_SUBJECT = = false ] ] && [ [ $PROCESS_BASELINE = = true ] ] && [ [ $PROCESS_SIZE = = true ] ] ; then
# RESOLUTION TAGS MANIPULATION - non-Dual ISO CR2 only
#WRITENEWFILE=true
SUFFIX = _UB
# 1) Check if Size process variable is true
# 2) If question "Do we have a 5D Mark string in the file?" does not
# return 0, E.G. the camera model is 5D Mark 3.
# true, false, true
elif [ [ $PROCESS_SUBJECT = = true ] ] && [ [ $PROCESS_BASELINE = = false ] ] && [ [ $PROCESS_SIZE = = true ] ] ; then
if \
[ [ " ${ PROCESS_SIZE } " = = true ] ] && \
[ [ " ${ C5DMK3_CHECK } " -ne 0 ] ]
then
#WRITENEWFILE=true
SUFFIX = _US
# According to file analysis done with CR2 and DNG files,
# Cropped & Exif Width/Height tags should be written into CR2 files.
# CR2 files require only Cropped Image Height/Width values,
# but if we convert an uncropped CR2 file into DNG, we get wrong picture size.
# To correct this for DNG files, Exif Height/Witdh values are required, too.
# false, true, false
elif [ [ $PROCESS_SUBJECT = = false ] ] && [ [ $PROCESS_BASELINE = = true ] ] && [ [ $PROCESS_SIZE = = false ] ] ; then
# WHY WE DON'T CHANGE EXIF TAGS FOR DNG FILES HERE?
# We can't uncrop DNG file procuded by Adobe algorithms (Adobe DNG Converter or raw2dng).
# This is because Adobe's method writes a tag name "Default Crop Size" which can't be
# changed afterwards without rendering the image unusable in Adobe Camera Raw software.
#
# My hypothesis about the issue is as follows:
# Camera Raw may do some comparison check between dimensions defined in "Default Crop Size"
# and some of the exif-unwritable Width/Height values. If there's a mismatch, the file can't
# be opened in Adobe Camera Raw software. An image that can't be opened in ACR, is still
# usable in some other RAW processing software (because their check for EXIF value tags differ).
#
# Every time I edited "Default Crop Size" value in DNG file, ACR gave me an error about
# unsupported or corrupted file.
#WRITENEWFILE=true
SUFFIX = _B
exiftool \
-CroppedImageWidth= " ${ C5DMK3_WIDTH } " \
-CroppedImageHeight= " ${ C5DMK3_HEIGHT } " \
-ExifImageWidth= " ${ C5DMK3_WIDTH } " \
-ExifImageHeight= " ${ C5DMK3_HEIGHT } " \
" ${ INPUT } " \
-overwrite_original
# true, false, false
elif [ [ $PROCESS_SUBJECT = = true ] ] && [ [ $PROCESS_BASELINE = = false ] ] && [ [ $PROCESS_SIZE = = false ] ] ; then
echo -e " ${ INPUT_BASENAME } : Image dimensions updated to ${ C5DMK3_WIDTH } x ${ C5DMK3_HEIGHT } .\n "
#WRITENEWFILE=true
SUFFIX = _S
# Other useful Height/Width tags are as follows:
# false, false, true
elif [ [ $PROCESS_SUBJECT = = false ] ] && [ [ $PROCESS_BASELINE = = false ] ] && [ [ $PROCESS_SIZE = = true ] ] ; then
# -OriginalImageWidth
# -OriginalImageHeight
#WRITENEWFILE=true
SUFFIX = _U
# -RelatedImageWidth
# -RelatedImageHeight
fi
fi
################################################################
# RESOLUTION TAGS MANIPULATION - non-Dual ISO CR2 only
# 1) Check if Size process variable is true
# 2) If question "Do we have a 5D Mark string in the file?" does not return 0, E.G. the camera model is 5D Mark 3...
# And if all previous checks pass, then we do our tricks here.
if [ [ $PROCESS_SIZE = = true ] ] && [ [ $C5DMK3_CHECK != 0 ] ] ; then
# BASELINE TAGS ADDITION - non-Dual ISO CR2 only
# According to file analysis done with CR2 and DNG files, Cropped & Exif Width/Height tags should be written in a CR2 files.
# CR2 files require only Cropped Image Height/Width values, but if we convert an uncropped CR2 file into DNG, we get wrong picture size.
# To correct this for DNG files, Exif Height/Witdh values are required, too.
# 1) We can request that PROCESS variable returns true though it's set to
# false in Dual ISO CR2 images too. These CR2 images have Baseline values
# already added into EXIF metadata since 01/07/2017 (cr2hdr code patched).
# WHY WE DON'T CHANGE EXIF TAGS FOR DNG FILES HERE?
# We can't uncrop DNG file procuded by Adobe algorithms (Adobe DNG Converter or raw2dng). This is because Adobe's method writes a tag named
#"Default Crop Size" which can't be changed afterwards without rendering the image unusable in Adobe Camera Raw software. I assume Camera Raw
# does some comparison check between dimensions defined in "Default Crop Size" and some of the exif-unwritable Width/Height values, and if
# there's a mismatch, the file can't be opened in Adobe Camera Raw software. I tested it so an image that can't be opened in ACR, is still
# usable in some other RAW processing software (because their check for EXIF value tags differ).
# 2) We check for Canon 5D Mark 3 here
# Every time I edited "Default Crop Size" value in DNG, ACR gave me an error claiming the file is unsupported or corrupted.
# NOTE: We don't care about the image resolution here.
exiftool -CroppedImageWidth= $C5DMK3_WIDTH -CroppedImageHeight= $C5DMK3_HEIGHT -ExifImageWidth= $C5DMK3_WIDTH -ExifImageHeight= $C5DMK3_HEIGHT " ${ INPUT } " -overwrite_original
echo -e " ${ INPUT_BASENAME } : Image dimensions updated to $C5DMK3_WIDTH x $C5DMK3_HEIGHT .\n "
# Other useful Height/Width tags are as follows:
if \
[ [ " ${ PROCESS_BASELINE } " = = true ] ] && \
[ [ " ${ C5DMK3_CHECK } " -ne 0 ] ]
then
# -OriginalImageWidth
# -OriginalImageHeight
# The following tags (with their respective values) are being used in DNG files
# converted from CR2 files of Canon 5D Mark 3. Because CR2 files are mostly
# equal to DNG files but these tags don't exist inside CR2 files, we can add them
# as shown in the following section.
# -RelatedImageWidth
# -RelatedImageHeight
fi
################################################################
# BASELINE TAGS ADDITION - non-Dual ISO CR2 only
# 1) We can request that PROCESS variable returns true though it's set to false in Dual ISO CR2 images too. These CR2 images have Baseline values
# already added into EXIF metadata since 01/07/2017 (cr2hdr code patched).
# 2) We check for Canon 5D Mark 3 here
# NOTE: We don't care about the image resolution here.
if [ [ $PROCESS_BASELINE = = true ] ] && [ [ $C5DMK3_CHECK != 0 ] ] ; then
# The following tags (with their respective values) are being used in DNG files converted from CR2 files of Canon 5D Mark 3 camera. Because CR2 files are mostly equal to
# DNG files but these tags don't exist inside CR2 files, we can add them as done in the following lines.
# ######################################################
#
# Camera Model: Canon EOS 5D Mark III
# ISO Value Baseline Exposure Value
#
# 100 0.25
# 125 0.25
# 200 0.25
# 250 0.25
# 400 0.25
# 500 0.25
# 800 0.25
# 1000 0.25
# 1600 0.25
# 2000 0.25
# 3200 0.25
# 4000 0.25
# 6400 0.25
# 8000 0.25
# 12800 0.25
# 16000 0.25
# 25600 0.25
#
# 50 -0.75
# 160 0.02
# 320 0.01
# 640 0.01
# 1250 0.01
# 2500 0.01
# 5000 0.01
# 10000 0.01
# 20000 0.01
# 51200 0.36
# 102400 0.36
#
# ######################################################
#
# Same values for all ISOs:
#
# Baseline Noise 0.8
# Baseline Sharpness 1.2
# Bayer Green Split 100
#
# ######################################################
#
# Camera Profiles in Adobe Camera RAW - Baseline Exposure Offsets:
#
# All Canon EOS 5D Mark 3 profiles (Standard, Neutral, Landscape etc.): -0.25
# Adobe Standard Profile: 0.00
#
# ######################################################
# We Do ISO check with Exposure Index value (It returns the same value than used ISO, and works with ISO 102400, too)
if [ [ $ISO_VALUE = = 50 ] ] ; then
BL_EXP = -0.75
elif [ [ $ISO_VALUE = = 160 ] ] ; then
BL_EXP = 0.02
elif [ [ $ISO_VALUE = = 51200 ] ] || [ [ $ISO_VALUE = = 102400 ] ] ; then
BL_EXP = 0.36
elif [ [ $ISO_VALUE = = 320 ] ] || [ [ $ISO_VALUE = = 640 ] ] || [ [ $ISO_VALUE = = 1250 ] ] || [ [ $ISO_VALUE = = 2500 ] ] || [ [ $ISO_VALUE = = 5000 ] ] || [ [ $ISO_VALUE = = 10000 ] ] || [ [ $ISO_VALUE = = 20000 ] ] ; then
BL_EXP = 0.01
else
BL_EXP = 0.25
fi
exiftool -BaselineExposure= $BL_EXP -BaselineNoise= 0.8 -BaselineSharpness= 1.2 -BayerGreenSplit= 100 " ${ INPUT } " -overwrite_original
echo -e " ${ INPUT_BASENAME } : Baseline tags added.\n "
# ######################################################
#
# Camera Model: Canon EOS 5D Mark III
# ISO Value Baseline Exposure Value
#
# 100 0.25
# 125 0.25
# 200 0.25
# 250 0.25
# 400 0.25
# 500 0.25
# 800 0.25
# 1000 0.25
# 1600 0.25
# 2000 0.25
# 3200 0.25
# 4000 0.25
# 6400 0.25
# 8000 0.25
# 12800 0.25
# 16000 0.25
# 25600 0.25
#
# 50 -0.75
# 160 0.02
# 320 0.01
# 640 0.01
# 1250 0.01
# 2500 0.01
# 5000 0.01
# 10000 0.01
# 20000 0.01
# 51200 0.36
# 102400 0.36
#
# ######################################################
#
# Same values for all ISOs:
#
# Baseline Noise 0.8
# Baseline Sharpness 1.2
# Bayer Green Split 100
#
# ######################################################
#
# Camera Profiles in Adobe Camera RAW - Baseline Exposure Offsets:
#
# All Canon EOS 5D Mark 3 profiles (Standard, Neutral, Landscape etc.): -0.25
# Adobe Standard Profile: 0.00
#
# ######################################################
# We Do ISO check with Exposure Index value (It returns the same
# value than used ISO, and works with ISO 102400, too).
if [ [ " ${ ISO_VALUE } " -eq 50 ] ]
then
BL_EXP = -0.75
elif [ [ " ${ ISO_VALUE } " -eq 160 ] ]
then
BL_EXP = 0.02
elif \
[ [ " $ISO_VALUE } " -eq 51200 ] ] || \
[ [ " $ISO_VALUE } " -eq 102400 ] ]
then
BL_EXP = 0.36
elif \
[ [ " ${ ISO_VALUE } " -eq 320 ] ] || \
[ [ " ${ ISO_VALUE } " -eq 640 ] ] || \
[ [ " ${ ISO_VALUE } " -eq 1250 ] ] || \
[ [ " ${ ISO_VALUE } " -eq 2500 ] ] || \
[ [ " ${ ISO_VALUE } " -eq 5000 ] ] || \
[ [ " ${ ISO_VALUE } " -eq 10000 ] ] || \
[ [ " ${ ISO_VALUE } " -eq 20000 ] ]
then
BL_EXP = 0.01
else
BL_EXP = 0.25
fi
# ######################################################
exiftool \
-BaselineExposure= " ${ BL_EXP } " \
-BaselineNoise= 0.8 \
-BaselineSharpness= 1.2 \
-BayerGreenSplit= 100 \
" ${ INPUT } " \
-overwrite_original
################################################################
echo -e " ${ INPUT_BASENAME } : Baseline tags added.\n "
# SUBJECT TAG ADDITION
fi
if [ [ $PROCESS_SUBJECT = = true ] ] && [ [ $C5DMK3_CHECK != 0 ] ] ; then
################################################################
exiftool -xmp:subject= " $SUBJECT_TAG " " ${ INPUT } " -overwrite_original
# SUBJECT TAG ADDITION
echo -e " ${ INPUT_BASENAME } : New Subject tag added: $SUBJECT_TAG \n "
if \
[ [ " ${ PROCESS_SUBJECT } " = = true ] ] && \
[ [ " ${ C5DMK3_CHECK } " -ne 0 ] ]
then
exiftool -xmp:subject= " ${ SUBJECT_TAG } " " ${ INPUT } " -overwrite_original
echo -e " ${ INPUT_BASENAME } : New Subject tag added: $SUBJECT_TAG \n "
fi
fi
################################################################
################################################################
# FILE SUFFIX ADDITION
# FILE SUFFIX ADDITION
exiftool "-FileModifyDate<EXIF:DateTimeOriginal" " ${ INPUT } "
#if [[ $WRITENEWFILE == true ]]; then
NEWFILE = " ${ INPUT_DIR } " /" ${ INPUT_BASENAME } ${ SUFFIX } " ." ${ INPUT_EXTENSION } "
exiftool "-FileModifyDate<EXIF:DateTimeOriginal" " ${ INPUT } " #For individual images and commands, use -P parameter
mv " ${ INPUT } " " ${ NEWFILE } "
NEWFILE = " ${ INPUT_DIR } " /" ${ INPUT_BASENAME } " $SUFFIX ." ${ INPUT_EXTENSION } "
exiftool '-FileName<DateTimeOriginal' -d '%Y%m%d-%f%%-c.%%e' " ${ NEWFILE } "
mv " ${ INPUT } " " ${ NEWFILE } "
if [ [ " ${ 2 } " != "" ] ] ; then
echo "Moving to the next file."
fi
exiftool '-FileName<DateTimeOriginal' -d '%Y%m%d-%f%%-c.%%e' " ${ NEWFILE } "
################################################################
#fi
# PROGRESSBAR CODE - BEGIN
if [ [ " ${ 2 } " != "" ] ] ; then
echo "Moving to the next file."
fi
let inc++
################################################################
# Percentage needs to be calculated like this due to bash rounding limitations.
PERCENT_VALUE = $(( ( ${ mltp } * ${ tics } ) / ( 200 * ${ numargs } / ${ inc } % 2 + ${ mltp } * ${ numargs } / ${ inc } )) )
# Output: 20, 40, 59, 80, 100 etc.
####PROGRESSBAR STUFF - BEGIN
let inc++
qdbus $dbusRef Set "" "value" " ${ PERCENT_VALUE } " ;
qdbus $dbusRef setLabelText " ${ LABELTEXT } ( ${ inc } / ${ numargs } ) " ;
#Percentage needs to be calculated like this due to bash rounding limitations...
PERCENT_VALUE = $(( ( $mltp * $tics ) / ( 200 * $numargs / $inc % 2 + $mltp * $numargs / $inc )) )
#Output: 20, 40, 59, 80, 100 etc.
# PROGRESSBAR CODE - END
qdbus $dbusRef Set "" "value" $PERCENT_VALUE ;
qdbus $dbusRef setLabelText " $LABELTEXT ( $inc / $numargs ) " ;
####PROGRESSBAR STUFF - END
shift # Move to the next file
# Move to the next file.
shift
done
##############################################
#Close processing window if cancelled event has been triggered.
# Close processing window if cancelled event has been triggered.
# PROGRESSBAR CODE - BEGIN
####PROGRESSBAR STUFF - BEGIN
# If the process was cancelled, remove tmp file and exit the script.
if [ [ ! $( qdbus $dbusRef wasCancelled) = = "false" ] ] ; then
exit
exit 0
fi
##############################################
#Close processing window if not cancelled and processing finished.
qdbus $dbusRef close
####PROGRESSBAR STUFF - END
exit
##############################################
################################################################################################
# PROGRESSBAR CODE - END
# DEPRECATED
#
# ##while [ $# -gt 0 ]; do
# CROPPED=$1
# EXTENSION=$(echo $1 | rev | cut -f 1 -d '.' | rev) #Get the correct file extension for an input file (so the new one will use the same)
# UNCROPPED=$(echo "$CROPPED" | sed "s/\.\w*$/_uncropped.$EXTENSION/")
#
# #Is the uncropping already done for a file? If yes, we skip this step. This passes only if file doesn't exist.
# if [[ ! -e $INPUT_DIR/uncropped/$UNCROPPED ]]; then
#
# if [[ $(cr2hdr --dry-run $CROPPED | grep "Interlaced ISO detected" | wc -l) == 1 ]] || [[ $(exiftool $CROPPED |grep "Dual-ISO" | wc -l) != 0 ]] ; then # Test an input file for Dual ISO.
# return 1; #Do not edit Exif data of a Dual ISO file.
# else
# exifres_5dmk3
# mv $UNCROPPED $INPUT_DIR/uncropped/
# fi
# fi
#
# ####PROGRESSBAR STUFF - BEGIN
# let inc++
#
# #Percentage needs to be calculated like this due to bash rounding limitations...
# PERCENT_VALUE=$((($mltp*$tics)/(200*$numargs/$inc % 2 + $mltp*$numargs/$inc)))
# #Output: 20, 40, 59, 80, 100 etc.
#
# qdbus $dbusRef Set "" "value" $PERCENT_VALUE;
# qdbus $dbusRef setLabelText "$LABELTEXT ($inc/$numargs)";
# ####PROGRESSBAR STUFF - END
#
# shift
# done
#
####PROGRESSBAR STUFF - BEGIN
#$(qdbus $dbusRef wasCancelled) = "true"
#qdbus $dbusRef close
#done
####PROGRESSBAR STUFF - END
#
#Delete empty dir, if no files have been generated
#if [[ $(ls $INPUT_DIR/uncropped/ | wc -l) == 0 ]]; then
# rm -Rf $INPUT_DIR/uncropped/
#fi
#
# DEPRECATED
exit 0
