Browse Source

amiga and sun3 turned out to not be y2k+3 compliant here. Remove them, as

well as the few userland tools which were only used on these platforms.
OPENBSD_3_3
miod 22 years ago
parent
commit
08c1785488
16 changed files with 0 additions and 1455 deletions
  1. +0
    -492
      src/etc/etc.amiga/MAKEDEV
  2. +0
    -194
      src/etc/etc.amiga/MAKEDEV.md
  3. +0
    -23
      src/etc/etc.amiga/Makefile.inc
  4. +0
    -58
      src/etc/etc.amiga/disktab
  5. +0
    -0
      src/etc/etc.amiga/fbtab
  6. +0
    -0
      src/etc/etc.amiga/sysctl.conf
  7. +0
    -26
      src/etc/etc.amiga/ttys
  8. +0
    -385
      src/etc/etc.sun3/MAKEDEV
  9. +0
    -109
      src/etc/etc.sun3/MAKEDEV.md
  10. +0
    -19
      src/etc/etc.sun3/Makefile.inc
  11. +0
    -50
      src/etc/etc.sun3/README
  12. +0
    -61
      src/etc/etc.sun3/disktab
  13. +0
    -0
      src/etc/etc.sun3/fbtab
  14. +0
    -23
      src/etc/etc.sun3/install.sh
  15. +0
    -2
      src/etc/etc.sun3/sysctl.conf
  16. +0
    -13
      src/etc/etc.sun3/ttys

+ 0
- 492
src/etc/etc.amiga/MAKEDEV View File

@ -1,492 +0,0 @@
#!/bin/sh -
#
# THIS FILE AUTOMATICALLY GENERATED. DO NOT EDIT.
# generated from:
#
# OpenBSD: etc.amiga/MAKEDEV.md,v 1.11 2002/12/05 04:30:21 kjc Exp
# OpenBSD: MAKEDEV.mi,v 1.53 2002/12/05 04:30:21 kjc Exp
# OpenBSD: MAKEDEV.sub,v 1.7 2002/02/16 01:19:52 deraadt Exp
#
#
# Copyright (c) 2001,2002 Todd T. Fries <todd@OpenBSD.org>
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. The name of the author may not be used to endorse or promote products
# derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
# AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
# THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Device "make" file. Valid arguments:
# all makes all known devices, including local devices.
# Tries to make the ``standard'' number of each type.
# std standard devices
# local configuration specific devices
# Tapes:
# st* SCSI tapes
# Disks:
# ramdisk devices needed for install floppies
# sd* SCSI disks
# rd* "rd" pseudo-disks
# ccd* concatenated disk devices
# wd* "winchester" disk drives (ST506, IDE, ESDI, RLL, ...)
# cd* SCSI cdrom drives
# vnd* "file" pseudo-disks
# Console ports:
# ttye* ite bitmapped consoles
# Pointing devices:
# mouse* Amiga mice
# Terminal ports:
# tty0* NS16x50 serial ports
# ttyA* mfc serial ports
# ttyB* ISA COM ports
# Pseudo terminals:
# tty* set of 16 slave psuedo terminals
# pty* set of 16 master pseudo terminals
# Printers:
# par* motherboard parallel port
# lpt* IEEE 1284 centronics printer
# lpa* interruptless lp
# Special purpose devices:
# grf* Motherboard bitmapped video.
# kbd keyboard (provides events, for X11)
# joy* joystick driver
# kbd Amiga keyboard
# view* generic interface to graphic displays
# aconf autoconfig information (not yet)
# lkm loadable kernel modules interface
# bpf* Berkeley Packet Filter
# tun* network tunnel driver
# pf* Packet Filter
# ss* SCSI scanners
# uk* SCSI Unknown device
# *random inkernel random data source
# audio* audio device
# xfs* XFS filesystem devices
# ch* SCSI media changer
# fd makes fd/* for the fdescfs
# systrace* system call tracing device
PATH=/sbin:/usr/sbin:/bin:/usr/bin
T=$0
# set this to echo for Echo-Only debugging
[ "$eo" ] || eo=
hex()
{
case $1 in
[0-9]) echo -n $1;;
10) echo -n a;;
11) echo -n b;;
12) echo -n c;;
13) echo -n d;;
14) echo -n e;;
15) echo -n f;;
esac
}
trunc()
{
# XXX pdksh can't seem to deal with locally scoped variables
# in ${foo#$bar} expansions
arg1="$1"
arg2="$2"
case $3 in
l) echo ${arg2#$arg1} ;;
r|*) echo ${arg1#$arg2} ;;
esac
}
unt()
{
# XXX pdksh can't seem to deal with locally scoped variables
# in ${foo#$bar} expansions
arg="$1"
tmp="${arg#[a-zA-Z]*}"
tmp="${tmp%*[a-zA-Z]}"
while [ "$tmp" != "$arg" ]
do
arg=$tmp
tmp="${arg#[a-zA-Z]*}"
tmp="${tmp%*[a-zA-Z]}"
done
echo $arg
}
dodisk()
{
[ "$DEBUG" ] && set -x
n=$(($((${5}*${7:-16}))+${6})) count=0
RMlist="$RMlist $1$2? r$1$2?"
[ 0$7 -ne 8 ] && l="i j k l m n o p"
for d in a b c d e f g h $l
do
M $1$2$d b $3 $(($n+$count)) 640
M r$1$2$d c $4 $(($n+$count)) 640
let count=count+1
done
MKlist="$MKlist;chown root.operator $1$2? r$1$2?"
}
dodisk2()
{
n=$(($(($5*${7:-16}))+$6))
M $1$2a b $3 $n 640 operator
M r$1$2a c $4 $n 640 operator
n=$(($n+2))
M $1$2c b $3 $n 640 operator
M r$1$2c c $4 $n 640 operator
}
# M name b/c major minor [mode] [group]
RMlist="rm -f"
MKlist=":"
mkl() {
[ "${mklist[$1]}" ] && {
mklist[$1]="${mklist[$1]};mknod -m $1 $2 $3 $4 $5"
} || {
mklist[$1]="mknod -m $1 $2 $3 $4 $5"
modes="$modes $1"
}
}
M() {
RMlist="$RMlist $1"
mkl ${5-666} $1 $2 $3 $4
mklist="$mklist $1"
G=${6:-wheel}
[ "$7" ] && {
MKlist="$MKlist;chown $7.$G $1"
} || {
case $G in
wheel)g=0;;kmem)g=2;;operator)g=5;;tty)g=4;;dialer)g=117;;
esac
[ "${grplist[$g]}" ] && {
grplist[$g]="${grplist[$g]} $1"
} || {
groups="$groups $g"
grplist[$g]="chgrp $G $1"
}
}
return 0
}
R() {
[ "$DEBUG" ] && set -x
for i in "$@"
do
U=`unt $i`
[ "$U" ] || U=0
case $i in
ramdisk)
R std kbd pty0 tty00 ttyA0 ttyA1 ttyB0 ttyB1
R ttye0 ttye1 ttye2 ttye3 ttye4 ttye5 ttye6
R cd0 cd1 sd0 sd1 sd2 sd3 st0 st1
R fd0 fd1 wd0 wd1 rd0 random
;;
std)
M console c 0 0 600
M tty c 1 0
M mem c 2 0 640 kmem
M kmem c 2 1 640 kmem
M null c 2 2
M zero c 2 12
M stdin c 21 0
M stdout c 21 1
M stderr c 21 2
M ksyms c 42 0 640 kmem
M drum c 3 0 640 kmem
M klog c 6 0 600
M reload c 2 20 600
;;
ttyA[01])
M ttyA$U c 17 $U 660 dialer uucp
M ttyM$U c 17 $(($U+128)) 660 dialer uucp
;;
par*)
case $U in
0)
M par$U c 11 $U 600
;;
*)
echo bad unit for par in: $i
;;
esac
;;
ttye*)
case $U in
0|1|2|3|4|5|6)
M ttye$U c 13 $U 600
;;
*)
echo bad unit for ttye in: $i
;;
esac
;;
grf*)
case $U in
0|1|2|3|4|5|6)
M grf$U c 10 $U
;;
*)
echo bad unit for grf in: $i
;;
esac
# for those that need it, also make overlay and image devices:
case $U in
4)
M grfov$U c 10 $(($U+16)) 600
M grfim$U c 10 $(($U+32)) 600
;;
esac
;;
mouse*)
case $U in
0|1)
M mouse$U c 15 $U
if [ $U = 0 ]
then
MKlist="$MKlist;rm -f mouse; ln -s mouse$U mouse"
fi
;;
*)
echo bad unit for mouse in: $i
;;
esac
;;
view*)
case $U in
00|01|02|03|04|05|06|07|08|09)
M view$U c 16 $U
;;
*)
echo bad unit for view in: $i
;;
esac
;;
ttyB*)
M ttyB$U c 32 $U 660 dialer uucp
M cuaB$U c 32 $(($U+128)) 660 dialer uucp
;;
systrace)
M systrace c 50 0 644
;;
fd)
RMlist="mkdir -p fd;$RMlist" n=0
while [ $n -lt 64 ];do M fd/$n c 21 $n;n=$(($n+1));done
MKlist="$MKlist;chmod 555 fd"
;;
ch*)
M ch$U c 40 $U 660 operator
;;
xfs*)
M xfs$U c 51 $U 600
;;
audio*)
M sound$U c 39 $U
M mixer$U c 39 $(($U+16))
M audio$U c 39 $(($U+128))
M audioctl$U c 39 $(($U+192))
MKlist="$MKlist;[ -e audio ] || ln -s audio$U audio"
MKlist="$MKlist;[ -e mixer ] || ln -s mixer$U mixer"
MKlist="$MKlist;[ -e sound ] || ln -s sound$U sound"
MKlist="$MKlist;[ -e audioctl ] || ln -s audioctl$U audioctl"
;;
*random)
n=0
for pre in " " s u p a
do
M ${pre}random c 35 $n 644
n=$(($n+1))
done
;;
uk*)
M uk$U c 36 $U 640 operator
;;
ss*)
M ss$U c 25 $(($U*16)) 640 operator
M nss$U c 25 $(($(($U*16))+1)) 640 operator
M enss$U c 25 $(($(($U*16))+3)) 640 operator
RMlist="$RMlist scan$U"
MKlist="$MKlist;umask 77;ln -s ss$U scan$U"
;;
pf*)
M pf c 34 0 600
;;
tun*)
M tun$U c 23 $U 600
;;
bpf*)
M bpf$U c 22 $U 600
;;
lkm)
M lkm c 24 0 640 kmem
;;
joy*)
M joy$U c 43 $U 666
;;
kbd)
M kbd c 14 0 600
;;
lpt*|lpa*)
case $i in
lpt*) n=lpt f=0;;
lpa*) n=lpa f=128;;
esac
M $n$U c 33 $(($U+$f)) 600
;;
pty*)
if [ $U -gt 15 ]; then
echo bad unit for pty in: $i
continue
fi
set -A tbl p q r s t u v w x y z P Q R S T
name=${tbl[$U]}
n=0
while [ $n -lt 16 ]
do
nam=$name$(hex $n)
off=$(($U*16))
M tty$nam c 4 $(($off+$n))
M pty$nam c 5 $(($off+$n))
n=$(($n+1))
done
;;
tty0*)
M tty$U c 12 $U 660 dialer uucp
M cua$U c 12 $(($U+128)) 660 dialer uucp
;;
vnd*)
dodisk vnd $U 6 19 $U 0
dodisk svnd $U 6 19 $U 128
;;
cd*)
dodisk2 cd $U 7 9 $U 0 8
;;
rd*)
dodisk2 rd $U 16 41 $U 0
;;
fd*)
case $U in 0|1|2|3)
M fd${U}a b 2 $(($U*16)) 640 operator
M fd${U}b b 2 $(($(($U*16))+1)) 640 operator
M rfd${U}a c 18 $(($U*16)) 640 operator
M rfd${U}b c 18 $(($(($U*16))+1)) 640 operator;;
*) echo bad unit for floppy disk in: $i;;
esac
;;
st*)
n=$(($U*16))
for pre in " " n e en
do
M ${pre}st$U b 5 $n 660 operator
M ${pre}rst$U c 20 $n 660 operator
n=$(($n+1))
done
;;
local)
test -s $T.local && sh $T.local
;;
all)
R ccd0 ccd1 ccd2 ccd3 vnd0 vnd1 vnd2 vnd3 sd0 sd1 sd2 sd3 sd4
R sd5 sd6 sd7 sd8 sd9 cd0 cd1 rd0 tun0 tun1 tun2 tun3 bpf0
R bpf1 bpf2 bpf3 bpf4 bpf5 bpf6 bpf7 bpf8 bpf9 pty0 pty1 pty2
R xfs0 ss0 ss1 ch0 local kbd mouse0 mouse1 par0 grf0 grf1 grf2
R grf3 grf4 grf5 grf6 audio0 uk0 random joy0 joy1 lpa0 lpa1
R lpa2 lpt0 lpt1 lpt2 lkm ttye0 ttye1 ttye2 ttye3 ttye4 ttye5
R ttye6 tty00 tty01 tty02 tty03 ttyB0 ttyB1 ttyB2 ttyB3 ttyB4
R ttyA0 ttyA1 pf systrace fd0 fd1 fd2 fd3 wd0 wd1 wd2 wd3 std
R st0 st1 fd
;;
wd*|sd*|ccd*)
case $i in
wd*) dodisk wd $U 0 37 $U 0;;
sd*) dodisk sd $U 4 8 $U 0;;
ccd*) dodisk ccd $U 8 7 $U 0;;
esac
;;
*)
echo $i: unknown device
;;
esac
done
}
R "$@"
if [ "$os" = "SunOS" ]; then
eo=transform
transform() {
case $mode in
600) mask=077;;
640) mask=027;;
660) mask=007;;
644) mask=022;;
666) mask=0;;
440) mask=227;;
esac
echo `echo "$@"|sed \
's/mknod -m \([0-9]*\) /umask '$mask';mknod /;s/-m [0-9]* //g;\
s/operator/5/g;s/root.kmem/root.2/g;s/root\./root:/g'`
}
fi
list="$RMlist"
for mode in $modes; do
list="$list;${mklist[$mode]}"
done
for group in $groups; do
list="$list;${grplist[$group]}"
done
list="$list;$MKlist"
if [ "$eo" = "echo" -o "$eo" = "transform" ]; then
$eo "$list"
else
echo "$list" | sh
fi

+ 0
- 194
src/etc/etc.amiga/MAKEDEV.md View File

@ -1,194 +0,0 @@
vers(__file__,
{-$OpenBSD: MAKEDEV.md,v 1.11 2002/12/05 04:30:21 kjc Exp $-},
etc.MACHINE)dnl
dnl
dnl Copyright (c) 2001 Todd T. Fries <todd@OpenBSD.org>
dnl All rights reserved.
dnl
dnl Redistribution and use in source and binary forms, with or without
dnl modification, are permitted provided that the following conditions
dnl are met:
dnl 1. Redistributions of source code must retain the above copyright
dnl notice, this list of conditions and the following disclaimer.
dnl 2. The name of the author may not be used to endorse or promote products
dnl derived from this software without specific prior written permission.
dnl
dnl THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
dnl INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
dnl AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
dnl THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
dnl EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
dnl PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
dnl OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
dnl WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
dnl OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
dnl ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
dnl
dnl
_TITLE(make)
_DEV(all)
_DEV(std)
_DEV(local)
_TITLE(tap)
_DEV(st, 20, 5)
_TITLE(dis)
_DEV(aflo, 18, 2)
_DEV(sd, 8, 4)
_DEV(rd, 41, 16)
_DEV(ccd, 7, 8)
_DEV(wd, 37, 0)
_DEV(cd, 9, 7, 8)
_DEV(vnd, 19, 6)
_TITLE(cons)
_DEV(ttye)
_TITLE(point)
_DEV(amouse)
_TITLE(term)
_DEV(com, 12)
_DEV(ttyA)
_DEV(attyB)
_TITLE(pty)
_DEV(tty, 4)
_DEV(pty, 5)
_TITLE(prn)
_DEV(par)
_DEV(lpt, 33)
_DEV(lpa)
_TITLE(spec)
_DEV(grf_amiga, 10)
_DEV(kbd, 14)
_DEV(joy, 43)
_DEV(akbd, 14)
_DEV(view)
_DEV(aconf)
_DEV(lkm, 24)
_DEV(bpf, 22)
_DEV(tun, 23)
_DEV(pf, 34)
_DEV(ss, 25)
_DEV(uk, 36)
_DEV(rnd, 35)
_DEV(au, 39)
_DEV(xfs, 51)
_DEV(ch, 40)
_DEV(fdesc, 21)
_DEV(systrace, 50)
dnl
divert(7)dnl
dnl
ramdisk)
_recurse std kbd pty0 tty00 ttyA0 ttyA1 ttyB0 ttyB1
_recurse ttye0 ttye1 ttye2 ttye3 ttye4 ttye5 ttye6
_recurse cd0 cd1 sd0 sd1 sd2 sd3 st0 st1
_recurse fd0 fd1 wd0 wd1 rd0 random
;;
_std(1, 2, 42, 3, 6)
M reload c 2 20 600
;;
ttyA[01])
M ttyA$U c 17 $U 660 dialer uucp
M ttyM$U c 17 Add($U, 128) 660 dialer uucp
;;
par*)
case $U in
0)
M par$U c 11 $U 600
;;
*)
echo bad unit for par in: $i
;;
esac
;;
ttye*)
case $U in
0|1|2|3|4|5|6)
M ttye$U c 13 $U 600
;;
*)
echo bad unit for ttye in: $i
;;
esac
;;
grf*)
case $U in
0|1|2|3|4|5|6)
M grf$U c 10 $U
;;
*)
echo bad unit for grf in: $i
;;
esac
# for those that need it, also make overlay and image devices:
case $U in
4)
M grfov$U c 10 Add($U, 16) 600
M grfim$U c 10 Add($U, 32) 600
;;
esac
;;
mouse*)
case $U in
0|1)
M mouse$U c 15 $U
if [ $U = 0 ]
then
MKlist="$MKlist;rm -f mouse; ln -s mouse$U mouse"
fi
;;
*)
echo bad unit for mouse in: $i
;;
esac
;;
view*)
case $U in
00|01|02|03|04|05|06|07|08|09)
M view$U c 16 $U
;;
*)
echo bad unit for view in: $i
;;
esac
;;
ttyB*)
M ttyB$U c 32 $U 660 dialer uucp
M cuaB$U c 32 Add($U, 128) 660 dialer uucp
;;
dnl
dnl *** amiga specific device targets
dnl
target(all, ses, 0)dnl
target(all, ch, 0)dnl
target(all, ss, 0, 1)dnl
target(all, xfs, 0)dnl
twrget(all, flo, fd, 0, 0B, 0C, 0D, 0E, 0F, 0G, 0H)dnl
twrget(all, flo, fd, 1, 1B, 1C, 1D, 1E, 1F, 1G, 1H)dnl
target(all, pty, 0, 1, 2)dnl
target(all, bpf, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9)dnl
target(all, tun, 0, 1, 2, 3)dnl
target(all, xy, 0, 1, 2, 3)dnl
target(all, rd, 0)dnl
target(all, cd, 0, 1)dnl
target(all, sd, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9)dnl
target(all, vnd, 0, 1, 2, 3)dnl
target(all, ccd, 0, 1, 2, 3)dnl
target(ramd, kbd)dnl
target(ramd, pty, 0)dnl
target(ramd, tty0, 0)dnl
target(ramd, ttyA, 0, 1)dnl
target(ramd, ttyB, 0, 1)dnl
target(ramd, ttye, 0, 1, 2, 3, 4, 5, 6)dnl
target(ramd, cd, 0, 1)dnl
target(ramd, sd, 0, 1, 2, 3)dnl
target(ramd, st, 0, 1)dnl
target(ramd, fd, 0, 1)dnl
target(ramd, wd, 0, 1)dnl
target(ramd, rd, 0)dnl

+ 0
- 23
src/etc/etc.amiga/Makefile.inc View File

@ -1,23 +0,0 @@
# $OpenBSD: Makefile.inc,v 1.16 2002/05/13 07:22:42 espie Exp $
# etc.amiga/Makefile.inc -- amiga-specific etc Makefile targets
MACHINE_HAS_TOOLS=Yes
.ifdef DESTDIR
snap_md: distrib bsd tools
cp ${.CURDIR}/../sys/arch/amiga/compile/GENERIC/bsd \
${DESTDIR}/snapshot/bsd
bsd:
# The GENERIC kernel is built as a side-effect of the miniroot
tools:
mkdir -p ${DESTDIR}/snapshot/tools
cp ${.CURDIR}/../sys/arch/amiga/stand/loadbsd/obj/loadbsd ${DESTDIR}/snapshot/tools
.for I in devtostream rdbinfo streamtodev xdevtostream xstreamtodev \
device-streams.tgz
cp ${.CURDIR}/../sys/arch/amiga/stand/device-streams/obj/${I} ${DESTDIR}/snapshot/tools
.endfor
.PHONY: bsd tools
.endif # DESTDIR check

+ 0
- 58
src/etc/etc.amiga/disktab View File

@ -1,58 +0,0 @@
#
# $OpenBSD: disktab,v 1.13 2002/06/09 06:15:14 todd Exp $
# $NetBSD: disktab,v 1.4 1995/11/28 05:40:23 jtc Exp $
#
# Disk geometry and partition layout tables.
# Key:
# dt controller type
# ty type of disk (fixed, removeable, simulated)
# d[0-4] drive-type-dependent parameters
# ns #sectors/track
# nt #tracks/cylinder
# nc #cylinders/disk
# sc #sectors/cylinder, ns*nt default
# su #sectors/unit, sc*nc default
# se sector size, DEV_BSIZE default
# rm rpm, 3600 default
# sf supports bad144-style bad sector forwarding
# sk sector skew per track, default 0
# cs sector skew per cylinder, default 0
# hs headswitch time, default 0
# ts one-cylinder seek time, default 0
# il sector interleave (n:1), 1 default
# bs boot block size, default BBSIZE
# sb superblock size, default SBSIZE
# o[a-h] partition offsets in sectors
# p[a-h] partition sizes in sectors
# b[a-h] partition block sizes in bytes
# f[a-h] partition fragment sizes in bytes
# t[a-h] partition types (filesystem, swap, etc)
#
# All partition sizes reserve space for bad sector tables.
# (5 cylinders needed for maintenance + replacement sectors)
#
floppy|floppy3|3in|Amiga 3.5in Double Density Floppy:\
:ty=floppy:se#512:nt#2:rm#300:ns#11:nc#80:\
:ts#3500:\
:ta=4.2BSD:pa#1760:oa#0:ba#4096:fa#512:\
:pb#0:ob#0:\
:pc#1760:oc#0:
floppyhd|floppy3hd|3inhd|Amiga 3.5in High Density Floppy:\
:ty=floppy:se#512:nt#2:rm#300:ns#22:nc#80:\
:ts=3500:\
:pa#3520:oa#0:ba#4096:fa#512:\
:pb#0:ob#0:\
:pc#3520:oc#0:
miniroot:\
:ty=winchester:se#512:nt#2:rm#300:ns#64:nc#80:\
:ts=3500:\
:pa#10240:oa#0:ba#8192:fa#1024:ta=4.2BSD:\
:pb#0:ob#0:\
:pc#10240:oc#0:
rdroot|ramdiskroot|RAM-disk root FS image:\
:ty=simulated:se#512:nc#16:nt#2:ns#128:\
:ta=4.2BSD:oa#0:pa#3584:fa#1024:ba#8192:\
:ob#0:pb#0:oc#0:pc#3584:

+ 0
- 0
src/etc/etc.amiga/fbtab View File


+ 0
- 0
src/etc/etc.amiga/sysctl.conf View File


+ 0
- 26
src/etc/etc.amiga/ttys View File

@ -1,26 +0,0 @@
#
# $OpenBSD: ttys,v 1.9 2002/06/09 06:15:14 todd Exp $
#
# name getty type status comments
#
# If the console is marked insecure, single-user requires
# the root password.
console "/usr/libexec/getty Pc" vt220 off secure
ttye0 "/usr/libexec/getty Pc" vt220 on secure # custom chips
ttye1 "/usr/libexec/getty Pc" vt220 on secure # retina
ttye2 "/usr/libexec/getty Pc" vt220 on secure # retina
ttye3 "/usr/libexec/getty Pc" vt220 on secure # cirrus logic
ttye4 "/usr/libexec/getty Pc" vt220 on secure # a2410
ttye5 "/usr/libexec/getty Pc" vt220 on secure # CyberVision64
ttye6 "/usr/libexec/getty Pc" vt220 on secure # Domino, Merlin, oMniBus
tty00 "/usr/libexec/getty std.9600" unknown off secure # int. serial
ttyB0 "/usr/libexec/getty std.9600" unknown off secure # ISA serial
ttyB1 "/usr/libexec/getty std.9600" unknown off secure # ISA serial
ttyB2 "/usr/libexec/getty std.9600" unknown off secure # ISA serial
ttyB3 "/usr/libexec/getty std.9600" unknown off secure # ISA serial
ttyB4 "/usr/libexec/getty std.9600" unknown off secure # ISA serial
ttyB5 "/usr/libexec/getty std.9600" unknown off secure # ISA serial
ttyB6 "/usr/libexec/getty std.9600" unknown off secure # ISA serial
ttyB7 "/usr/libexec/getty std.9600" unknown off secure # ISA serial
ttyB8 "/usr/libexec/getty std.9600" unknown off secure # ISA serial
ttyB9 "/usr/libexec/getty std.9600" unknown off secure # ISA serial

+ 0
- 385
src/etc/etc.sun3/MAKEDEV View File

@ -1,385 +0,0 @@
#!/bin/sh -
#
# THIS FILE AUTOMATICALLY GENERATED. DO NOT EDIT.
# generated from:
#
# OpenBSD: etc.sun3/MAKEDEV.md,v 1.10 2002/12/05 04:30:21 kjc Exp
# OpenBSD: MAKEDEV.mi,v 1.53 2002/12/05 04:30:21 kjc Exp
# OpenBSD: MAKEDEV.sub,v 1.7 2002/02/16 01:19:52 deraadt Exp
#
#
# Copyright (c) 2001,2002 Todd T. Fries <todd@OpenBSD.org>
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. The name of the author may not be used to endorse or promote products
# derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
# AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
# THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Device "make" file. Valid arguments:
# all makes all known devices, including local devices.
# Tries to make the ``standard'' number of each type.
# std standard devices
# local configuration specific devices
# Tapes:
# st* SCSI tapes
# Disks:
# sd* SCSI disks
# vnd* "file" pseudo-disks
# ccd* concatenated disk devices
# cd* SCSI cdrom drives
# xy* Xylogic 450/451 disks
# xd* Xylogic 753/7053 disks
# Terminal ports:
# tty[a-z]* Zilog 8530 Serial Port
# Pseudo terminals:
# tty* set of 16 slave psuedo terminals
# pty* set of 16 master pseudo terminals
# Printers:
# Call units:
# Special purpose devices:
# bwtwo*
# cgtwo*
# cgfour*
# bpf* Berkeley Packet Filter
# pf* Packet Filter
# tun* network tunnel driver
# rd* "rd" pseudo-disks
# *random inkernel random data source
# uk* SCSI Unknown device
# ss* SCSI scanners
# fd makes fd/* for the fdescfs
# xfs* XFS filesystem devices
# systrace* system call tracing device
# XXX - Keep /usr/etc so SunOS can find chown
test -d /usr/etc && PATH=$PATH:/usr/etc
PATH=/sbin:/usr/sbin:/bin:/usr/bin
T=$0
# set this to echo for Echo-Only debugging
[ "$eo" ] || eo=
hex()
{
case $1 in
[0-9]) echo -n $1;;
10) echo -n a;;
11) echo -n b;;
12) echo -n c;;
13) echo -n d;;
14) echo -n e;;
15) echo -n f;;
esac
}
trunc()
{
# XXX pdksh can't seem to deal with locally scoped variables
# in ${foo#$bar} expansions
arg1="$1"
arg2="$2"
case $3 in
l) echo ${arg2#$arg1} ;;
r|*) echo ${arg1#$arg2} ;;
esac
}
unt()
{
# XXX pdksh can't seem to deal with locally scoped variables
# in ${foo#$bar} expansions
arg="$1"
tmp="${arg#[a-zA-Z]*}"
tmp="${tmp%*[a-zA-Z]}"
while [ "$tmp" != "$arg" ]
do
arg=$tmp
tmp="${arg#[a-zA-Z]*}"
tmp="${tmp%*[a-zA-Z]}"
done
echo $arg
}
dodisk()
{
[ "$DEBUG" ] && set -x
n=$(($((${5}*${7:-16}))+${6})) count=0
RMlist="$RMlist $1$2? r$1$2?"
[ 0$7 -ne 8 ] && l="i j k l m n o p"
for d in a b c d e f g h $l
do
M $1$2$d b $3 $(($n+$count)) 640
M r$1$2$d c $4 $(($n+$count)) 640
let count=count+1
done
MKlist="$MKlist;chown root.operator $1$2? r$1$2?"
}
dodisk2()
{
n=$(($(($5*${7:-16}))+$6))
M $1$2a b $3 $n 640 operator
M r$1$2a c $4 $n 640 operator
n=$(($n+2))
M $1$2c b $3 $n 640 operator
M r$1$2c c $4 $n 640 operator
}
# M name b/c major minor [mode] [group]
RMlist="rm -f"
MKlist=":"
mkl() {
[ "${mklist[$1]}" ] && {
mklist[$1]="${mklist[$1]};mknod -m $1 $2 $3 $4 $5"
} || {
mklist[$1]="mknod -m $1 $2 $3 $4 $5"
modes="$modes $1"
}
}
M() {
RMlist="$RMlist $1"
mkl ${5-666} $1 $2 $3 $4
mklist="$mklist $1"
G=${6:-wheel}
[ "$7" ] && {
MKlist="$MKlist;chown $7.$G $1"
} || {
case $G in
wheel)g=0;;kmem)g=2;;operator)g=5;;tty)g=4;;dialer)g=117;;
esac
[ "${grplist[$g]}" ] && {
grplist[$g]="${grplist[$g]} $1"
} || {
groups="$groups $g"
grplist[$g]="chgrp $G $1"
}
}
return 0
}
R() {
[ "$DEBUG" ] && set -x
for i in "$@"
do
U=`unt $i`
[ "$U" ] || U=0
case $i in
ramdisk)
R std random bpf0 sd0 sd1 rd0 cd0
;;
std)
M console c 0 0 600
M tty c 2 0
M mem c 3 0 640 kmem
M kmem c 3 1 640 kmem
M null c 3 2
M zero c 3 12
M stdin c 23 0
M stdout c 23 1
M stderr c 23 2
M ksyms c 37 0 640 kmem
M drum c 7 0 640 kmem
M klog c 16 0 600
M kd c 1 0 600
M eeprom c 3 11 640 kmem
M mouse c 13 0
M fb c 22 0
M kbd c 29 0
M leds c 3 13 644
M vme16d16 c 3 5 600; MKlist="$MKlist;ln -s vme16d16 vme16"
M vme24d16 c 3 6 600; MKlist="$MKlist;ln -s vme24d16 vme24"
M vme32d16 c 3 7 600
M vme16d32 c 3 8 600
M vme24d32 c 3 9 600
M vme32d32 c 3 10 600; MKlist="$MKlist;ln -s vme32d32 vme32"
RMlist="$RMlist vme16 vme24 vme32"
;;
systrace)
M systrace c 86 0 644
;;
xfs*)
M xfs$U c 51 $U 600
;;
fd)
RMlist="mkdir -p fd;$RMlist" n=0
while [ $n -lt 64 ];do M fd/$n c 23 $n;n=$(($n+1));done
MKlist="$MKlist;chmod 555 fd"
;;
ss*)
M ss$U c 99 $(($U*16)) 640 operator
M nss$U c 99 $(($(($U*16))+1)) 640 operator
M enss$U c 99 $(($(($U*16))+3)) 640 operator
RMlist="$RMlist scan$U"
MKlist="$MKlist;umask 77;ln -s ss$U scan$U"
;;
uk*)
M uk$U c 98 $U 640 operator
;;
*random)
n=0
for pre in " " s u p a
do
M ${pre}random c 72 $n 644
n=$(($n+1))
done
;;
rd*)
dodisk2 rd $U 13 52 $U 0
;;
tun*)
M tun$U c 24 $U 600
;;
pf*)
M pf c 75 0 600
;;
bpf*)
M bpf$U c 36 $U 600
;;
cgfour*)
M cgfour$U c 39 $U 666
;;
cgtwo*)
M cgtwo$U c 31 $U 666
;;
bwtwo*)
M bwtwo$U c 27 $U 666
;;
pty*)
if [ $U -gt 15 ]; then
echo bad unit for pty in: $i
continue
fi
set -A tbl p q r s t u v w x y z P Q R S T
name=${tbl[$U]}
n=0
while [ $n -lt 16 ]
do
nam=$name$(hex $n)
off=$(($U*16))
M tty$nam c 20 $(($off+$n))
M pty$nam c 21 $(($off+$n))
n=$(($n+1))
done
;;
tty[a-z])
u=${i#tty*}
case $u in
a) n=0 ;;
b) n=1 ;;
c) n=4 ;;
d) n=5 ;;
*) echo unknown tty device $i ;;
esac
M tty$u c 12 $n 660 dialer uucp
;;
cd*)
dodisk2 cd $U 18 58 $U 0
;;
vnd*)
dodisk vnd $U 5 19 $U 0
dodisk svnd $U 5 19 $U 128
;;
st*)
n=$(($U*16))
for pre in " " n e en
do
M ${pre}st$U b 11 $n 660 operator
M ${pre}rst$U c 18 $n 660 operator
n=$(($n+1))
done
;;
local)
test -s $T.local && sh $T.local
;;
all)
R ccd0 ccd1 ccd2 ccd3 vnd0 vnd1 vnd2 vnd3 sd0 sd1 sd2 sd3 sd4
R cd0 cd1 rd0 xy0 xy1 xy2 xy3 tun0 tun1 tun2 tun3 bpf0 bpf1
R bpf2 bpf3 bpf4 bpf5 bpf6 bpf7 bpf8 bpf9 pty0 pty1 pty2 xfs0
R ss0 ss1 local cgfour0 cgtwo0 bwtwo0 uk0 random ttya ttyb
R ttyc ttyd pf systrace xd0 xd1 xd2 xd3 std st0 st1 fd
;;
xd*|xy*|sd*|ccd*)
case $i in
xd*) dodisk xd $U 10 42 $U 0;;
xy*) dodisk xy $U 3 9 $U 0;;
sd*) dodisk sd $U 7 17 $U 0;;
ccd*) dodisk ccd $U 9 33 $U 0;;
esac
;;
*)
echo $i: unknown device
;;
esac
done
}
R "$@"
if [ "$os" = "SunOS" ]; then
eo=transform
transform() {
case $mode in
600) mask=077;;
640) mask=027;;
660) mask=007;;
644) mask=022;;
666) mask=0;;
440) mask=227;;
esac
echo `echo "$@"|sed \
's/mknod -m \([0-9]*\) /umask '$mask';mknod /;s/-m [0-9]* //g;\
s/operator/5/g;s/root.kmem/root.2/g;s/root\./root:/g'`
}
fi
list="$RMlist"
for mode in $modes; do
list="$list;${mklist[$mode]}"
done
for group in $groups; do
list="$list;${grplist[$group]}"
done
list="$list;$MKlist"
if [ "$eo" = "echo" -o "$eo" = "transform" ]; then
$eo "$list"
else
echo "$list" | sh
fi

+ 0
- 109
src/etc/etc.sun3/MAKEDEV.md View File

@ -1,109 +0,0 @@
vers(__file__,
{-$OpenBSD: MAKEDEV.md,v 1.10 2002/12/05 04:30:21 kjc Exp $-},
etc.MACHINE)dnl
dnl
dnl Copyright (c) 2001 Todd T. Fries <todd@OpenBSD.org>
dnl All rights reserved.
dnl
dnl Redistribution and use in source and binary forms, with or without
dnl modification, are permitted provided that the following conditions
dnl are met:
dnl 1. Redistributions of source code must retain the above copyright
dnl notice, this list of conditions and the following disclaimer.
dnl 2. The name of the author may not be used to endorse or promote products
dnl derived from this software without specific prior written permission.
dnl
dnl THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
dnl INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
dnl AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
dnl THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
dnl EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
dnl PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
dnl OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
dnl WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
dnl OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
dnl ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
dnl
dnl
_TITLE(make)
_DEV(all)
_DEV(std)
_DEV(local)
_TITLE(tap)
_DEV(st, 18, 11)
_TITLE(dis)
_DEV(sd, 17, 7)
_DEV(vnd, 19, 5)
_DEV(ccd, 33, 9)
_DEV(cd, 58, 18)
_DEV(xy, 9, 3)
_DEV(xd, 42, 10)
_TITLE(term)
_DEV(tzs, 12)
dnl _DEV(czs, 12)
_TITLE(pty)
_DEV(tty, 20)
_DEV(pty, 21)
_TITLE(prn)
_TITLE(call)
_TITLE(spec)
_DEV(btw, 27)
_DEV(ctw, 31)
_DEV(cfr, 39)
_DEV(bpf, 36)
_DEV(pf, 75)
_DEV(tun, 24)
_DEV(rd, 52, 13)
_DEV(rnd, 72)
_DEV(uk, 98)
_DEV(ss, 99)
_DEV(fdesc, 23)
_DEV(xfs, 51)
_DEV(systrace, 86)
dnl
divert(2)dnl
dnl
# XXX - Keep /usr/etc so SunOS can find chown
test -d /usr/etc && PATH=$PATH:/usr/etc
dnl
divert(7)dnl
dnl
ramdisk)
R std random bpf0 sd0 sd1 rd0 cd0
;;
_std(2, 3, 37, 7, 16)
M kd c 1 0 600
M eeprom c 3 11 640 kmem
M mouse c 13 0
M fb c 22 0
M kbd c 29 0
M leds c 3 13 644
M vme16d16 c 3 5 600; MKlist="$MKlist;ln -s vme16d16 vme16"
M vme24d16 c 3 6 600; MKlist="$MKlist;ln -s vme24d16 vme24"
M vme32d16 c 3 7 600
M vme16d32 c 3 8 600
M vme24d32 c 3 9 600
M vme32d32 c 3 10 600; MKlist="$MKlist;ln -s vme32d32 vme32"
RMlist="$RMlist vme16 vme24 vme32"
;;
dnl
dnl *** sun3 specific targets
dnl
target(all, ses, 0)dnl
target(all, ch, 0)dnl
target(all, ss, 0, 1)dnl
target(all, xfs, 0)dnl
twrget(all, flo, fd, 0, 0B, 0C, 0D, 0E, 0F, 0G, 0H)dnl
twrget(all, flo, fd, 1, 1B, 1C, 1D, 1E, 1F, 1G, 1H)dnl
target(all, pty, 0, 1, 2)dnl
target(all, bpf, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9)dnl
target(all, tun, 0, 1, 2, 3)dnl
target(all, xy, 0, 1, 2, 3)dnl
target(all, hk, 0, 1, 2, 3)dnl
target(all, rd, 0)dnl
target(all, cd, 0, 1)dnl
target(all, sd, 0, 1, 2, 3, 4)dnl
target(all, vnd, 0, 1, 2, 3)dnl
target(all, ccd, 0, 1, 2, 3)dnl

+ 0
- 19
src/etc/etc.sun3/Makefile.inc View File

@ -1,19 +0,0 @@
# $OpenBSD: Makefile.inc,v 1.5 2002/05/13 07:22:43 espie Exp $
# etc.sun3/Makefile.inc -- sun3-specific etc Makefile targets
.ifdef DESTDIR
snap_md: bsd bootblocks distrib
cp ${.CURDIR}/../sys/arch/sun3/compile/GENERIC/bsd \
${DESTDIR}/snapshot/bsd
bsd:
cd ${.CURDIR}/../sys/arch/sun3/conf && config GENERIC
cd ${.CURDIR}/../sys/arch/sun3/compile/GENERIC && \
${MAKE} clean && ${MAKE} depend && exec ${MAKE}
bootblocks:
cp ${DESTDIR}/usr/mdec/*boot* ${DESTDIR}/snapshot
.PHONY: bsd bootblocks
.endif # DESTDIR check

+ 0
- 50
src/etc/etc.sun3/README View File

@ -1,50 +0,0 @@
# $OpenBSD: README,v 1.4 2002/06/09 06:15:15 todd Exp $ -*- text -*-
OpenBSD/Sun3 Binary Snapshot
This FTP directory contains a binary snapshot of OpenBSD/Sun3. This
can't be considered a working, stable release yet.
The OpenBSD/sun3 port should run on the following Sun3 machines (* means
having being tested):
Sun3/50
Sun3/60
Sun3/110
Sun3/160*
Sun3/260*
Devices currently supported include(* means having being tested):
Intel Ether (ie), on-board* or VME
Lance Ether (le), on-board
SCSI (sd,st,...), on-board or VME*. Sun-2 SCSI not supported yet.
keyboard/display console*
serial port (ttya/ttyb) console*
Other Features:
Generic kernel supports root on: sd[0123], ie0, le0
Kernel debugger included (ddb)
Runs SunOS binaries (see sparc sun shared lib notes)
There's still a lot left to do. Most of the code is borrowed from
NetBSD, and new code is being tested right now, but didn't make into
this snapshot.
To use this, all you need to do it unpack everything onto the disk that
will be used for root and usr, which can be either a real disk or some
part of your NFS server.
Don't forget to setup correct devices nodes after installing the
tarballs. Run something like:
(cd dev ; MAKEDEV std)
If you have any questions or comments about this port,or want to help,
please contact the Sun3 portmaster: <miod@openbsd.org>
I'm sorry this port isn't in good shape to be really usable now, but it
will mature over the next few months.
Enjoy anyway!
--
Miod Vallat

+ 0
- 61
src/etc/etc.sun3/disktab View File

@ -1,61 +0,0 @@
#
# $OpenBSD: disktab,v 1.7 2002/06/09 06:15:15 todd Exp $
# $NetBSD: disktab,v 1.3 1995/11/21 20:58:33 gwr Exp $
#
# Disk geometry and partition layout tables.
# Key:
# dt controller type
# ty type of disk (fixed, removeable, simulated)
# d[0-4] drive-type-dependent parameters
# ns #sectors/track
# nt #tracks/cylinder
# nc #cylinders/disk
# sc #sectors/cylinder, ns*nt default
# su #sectors/unit, sc*nc default
# se sector size, DEV_BSIZE default
# rm rpm, 3600 default
# sf supports bad144-style bad sector forwarding
# sk sector skew per track, default 0
# cs sector skew per cylinder, default 0
# hs headswitch time, default 0
# ts one-cylinder seek time, default 0
# il sector interleave (n:1), 1 default
# bs boot block size, default BBSIZE
# sb superblock size, default SBSIZE
# o[a-h] partition offsets in sectors
# p[a-h] partition sizes in sectors
# b[a-h] partition block sizes in bytes
# f[a-h] partition fragment sizes in bytes
# t[a-h] partition types (filesystem, swap, etc)
#
# All partition sizes reserve space for bad sector tables.
# (5 cylinders needed for maintenance + replacement sectors)
#
wren7|Seagate Wren 7:\
:dt=SCSI:ty=winchester:\
:nc#1632:ns#52:nt#15:\
:se#512:\
:rm#3600:\
:pa#65520:oa#0:ta=4.2BSD:\
:pb#65520:ob#65520:tb=swap:\
:pc#1272960:oc#0:\
:pd#65520:od#131040:td=4.2BSD:\
:pg#1076400:og#196560:tg=4.2BSD:
rdroot|ramdiskroot|RAM-disk root FS image:\
:ty=ramdisk:se#512:nt#2:ns#128:nc#16:\
:pa#4046:oa#0:ta=4.2BSD:ba#4096:fa#512:\
:pb#0:ob#0:tb=swap:\
:pc#4046:oc#0:
miniroot:\
:ty=winchester:se#512:nt#2:rm#300:ns#64:nc#80:\
:ts=3500:\
:pa#10240:oa#0:ba#8192:fa#1024:ta=4.2BSD:\
:pb#0:ob#0:\
:pc#10240:oc#0:
rdroot-sparc:\
:ty=ramdisk:se#512:nt#2:rm#300:ns#8:nc#1024:\
:pa#8192:oa#0:ta=4.2BSD:ba#8192:fa#1024: \
:pc#8192:oc#0:

+ 0
- 0
src/etc/etc.sun3/fbtab View File


+ 0
- 23
src/etc/etc.sun3/install.sh View File

@ -1,23 +0,0 @@
#!/bin/sh
# $OpenBSD: install.sh,v 1.3 2002/06/09 06:15:15 todd Exp $
umask 0
[ "$TARDIR" ] || { echo "$0: set TARDIR first" ; exit 1; }
while read f
do
gzip -d < $TARDIR/$f | tar xvpf -
done << \END_LIST
etc.tar.gz
dev.tar.gz
var.tar.gz
bin.tar.gz
sbin.tar.gz
usr.bin.tar.gz
usr.games.tar.gz
usr.include.tar.gz
usr.lib.tar.gz
usr.libexec.tar.gz
usr.misc.tar.gz
usr.sbin.tar.gz
usr.share.tar.gz
END_LIST

+ 0
- 2
src/etc/etc.sun3/sysctl.conf View File

@ -1,2 +0,0 @@
#kern.maxproc=250 # if you intend to rebuild OpenBSD, or other
# make-intensive process, increase this value

+ 0
- 13
src/etc/etc.sun3/ttys View File

@ -1,13 +0,0 @@
#
# $OpenBSD: ttys,v 1.4 2002/06/09 06:15:15 todd Exp $
#
# name getty type status comments
#
# Note: you may want to change the "default" entry in /etc/gettytab
# to make "no parity" the default (add the :np: flag).
#
# Also: the console is one of: kd, ttya, ttyb
console "/usr/libexec/getty std.9600" sun off secure
kd "/usr/libexec/getty std.9600" sun on secure
ttya "/usr/libexec/getty std.9600" unknown on secure
ttyb "/usr/libexec/getty std.9600" unknown off secure

Loading…
Cancel
Save