|
@ -1,6 +1,6 @@ |
|
|
#!/bin/sh - |
|
|
#!/bin/sh - |
|
|
# |
|
|
# |
|
|
# $OpenBSD: netstart,v 1.47 1999/03/26 14:34:31 niklas Exp $ |
|
|
|
|
|
|
|
|
# $OpenBSD: netstart,v 1.48 1999/03/29 22:09:58 niklas Exp $ |
|
|
|
|
|
|
|
|
# Returns true if $1 contains only alphanumerics |
|
|
# Returns true if $1 contains only alphanumerics |
|
|
isalphanumeric() { |
|
|
isalphanumeric() { |
|
@ -135,14 +135,37 @@ done |
|
|
# that name must be in /etc/hosts. |
|
|
# that name must be in /etc/hosts. |
|
|
if [ -f /etc/mygate ]; then |
|
|
if [ -f /etc/mygate ]; then |
|
|
route -n add -host default `cat /etc/mygate` |
|
|
route -n add -host default `cat /etc/mygate` |
|
|
|
|
|
|
|
|
# default multicast route for hosts with a gateway |
|
|
|
|
|
route -n add -net 224.0.0.0 -interface default |
|
|
|
|
|
else |
|
|
|
|
|
# default multicast route |
|
|
|
|
|
route -n add -net 224.0.0.0 -interface $hostname |
|
|
|
|
|
fi |
|
|
fi |
|
|
|
|
|
|
|
|
|
|
|
# Multicast routing. |
|
|
|
|
|
# |
|
|
|
|
|
# The routing to the 224.0.0.0/4 net is setup according to these rules: |
|
|
|
|
|
# multicast_host multicast_router route comment |
|
|
|
|
|
# NO NO -reject no multicast |
|
|
|
|
|
# NO YES none installed daemon will run |
|
|
|
|
|
# YES/interface NO -interface YES=def. iface |
|
|
|
|
|
# Any other combination -reject config error |
|
|
|
|
|
case "$multicast_host:$multicast_router" in |
|
|
|
|
|
NO:NO) |
|
|
|
|
|
route -n add -net 224.0.0.0/4 -interface 127.0.0.1 -reject;; |
|
|
|
|
|
NO:YES) |
|
|
|
|
|
;; |
|
|
|
|
|
*:NO) |
|
|
|
|
|
set `if [ $multicast_host = YES ]; then |
|
|
|
|
|
ed -s '!route -n show' <<EOF |
|
|
|
|
|
/^default/p |
|
|
|
|
|
EOF |
|
|
|
|
|
else |
|
|
|
|
|
ed -s "!ifconfig $multicast_host" <<EOF |
|
|
|
|
|
/^ inet /p |
|
|
|
|
|
EOF |
|
|
|
|
|
fi` |
|
|
|
|
|
route -n add -net 224.0.0.0/4 -interface $2;; |
|
|
|
|
|
*:*) |
|
|
|
|
|
echo 'config error, multicasting disabled until rc.conf is fixed' |
|
|
|
|
|
route -n add -net 224.0.0.0/4 -interface 127.0.0.1 -reject;; |
|
|
|
|
|
esac |
|
|
|
|
|
|
|
|
# Configure NAT after configuring network interfaces |
|
|
# Configure NAT after configuring network interfaces |
|
|
if [ "${ipnat}" = "YES" -a "${ipfilter}" = "YES" -a -f "${ipnat_rules}" ]; then |
|
|
if [ "${ipnat}" = "YES" -a "${ipfilter}" = "YES" -a -f "${ipnat_rules}" ]; then |
|
|
echo 'configuring NAT' |
|
|
echo 'configuring NAT' |
|
|