Source code pulled from OpenBSD for OpenNTPD. The place to contribute to this code is via the OpenBSD CVS tree.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

94 lines
3.7 KiB

#!/bin/sh -
#
# $OpenBSD: rc.conf,v 1.70 2001/10/12 22:40:58 jakob Exp $
# set these to "NO" to turn them off. otherwise, they're used as flags
routed_flags=NO # for normal use: "-q"
altqd_flags=NO # for normal use: ""
mrouted_flags=NO # for normal use: "", if activated
# be sure to enable multicast_router below.
rarpd_flags=NO # for normal use: "-a"
bootparamd_flags=NO # for normal use: ""
rbootd_flags=NO # for normal use: ""
sshd_flags="" # for normal use: ""
smtpfwdd_flags=NO # for normal use: ""; be sure to configure smtpd(8)
# and sendmail(8) to use MSA only
named_flags=NO # for normal use: ""
rdate_flags=NO # for normal use: name of RFC868 timeserver
timed_flags=NO # for normal use: ""
ntpdate_flags=NO # for normal use: NTP server; run before ntpd starts
photurisd_flags=NO # for normal use: ""
isakmpd_flags=NO # for normal use: ""
mopd_flags=NO # for normal use: "-a"
httpd_flags=NO # for normal use: "" (or "-DSSL" after reading ssl(8))
apmd_flags=NO # for normal use: ""
dhcpd_flags=NO # for normal use: "-q"
rtadvd_flags=NO # for normal use: list of interfaces
# be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO # for normal use: ""
# be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO # for normal use: interface
# be sure to set net.inet6.ip6.forwarding=0
# be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO # for normal use: "" (or "-l" for debugging)
# For normal use: "-L sm-mta -bd -q30m"
sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"
# Set to NO if ftpd is running out of inetd
ftpd_flags=NO # for non-inetd use: "-D"
# Set to NO if identd is running out of inetd
identd_flags=NO # for non-inetd use: "-b -u nobody -elo"
# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO # for normal use: ""
# For enabling console mouse support (i386 architecture only)
wsmoused_flags=NO # for ps/2 or usb mice: "", serial: "-p /dev/cua00"
# set the following to "YES" to turn them on
rwhod=NO
nfs_server=NO # see sysctl.conf for nfs client configuration
lockd=NO
gated=NO
amd=NO
pf=NO # Packet filter / NAT
portmap=YES # almost always needed
inetd=YES # almost always needed
check_quotas=YES # NO may be desirable in some YP environments
ntpd=YES # run ntpd if it exists
krb4_server_kdc=NO # kerberos server. run 'info kth-krb' for assistance.
krb4_slave_kdc=NO # kerberos slave server.
krb5_master_kdc=NO # KerberosV master KDC. Run 'info heimdal' for help.
krb5_slave_kdc=NO # KerberosV slave KDC.
afs=NO # mount and run afs
# Multicast routing configuration
# Please look at /etc/netstart for a detailed description if you change these
multicast_host=NO # Route all multicast packets to a single interface
multicast_router=NO # A multicast routing daemon will be run, e.g. mrouted
# miscellaneous other flags
# only used if the appropriate server is marked YES above
gated_flags=
ypserv_flags= # E.g. -1 for YP v1, -d for DNS etc
yppasswdd_flags= # "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags="-tun 4" # Crank the 4 for a busy NFS fileserver
amd_dir=/tmp_mnt # AMD's mount directory
amd_master=/etc/amd/master # AMD 'master' map
syslogd_flags= # add more flags, ie. "-u -a /chroot/dev/log"
named_user=named # Named should not run as root unless necessary
named_chroot=/var/named # Where to chroot named if not empty
pf_rules=/etc/pf.conf # Packet filter rules file
nat_rules=/etc/nat.conf # NAT rules file
pflogd_flags= # add more flags, ie. "-s 256"
afs_mount_point=/afs # Mountpoint for AFS
afs_device=/dev/xfs0 # Device used by afsd
afsd_flags=-z # Flags passed to afsd
shlib_dirs= # extra directories for ldconfig
local_rcconf="/etc/rc.conf.local"
[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line