npm gets its configuration values from the following sources, sorted by priority:
Putting --foo bar
on the command line sets the foo
configuration
parameter to "bar"
. A --
argument tells the cli parser to stop
reading flags. Using --flag
without specifying any value will set
the value to true
.
Example: --flag1 --flag2
will set both configuration parameters
to true
, while --flag1 --flag2 bar
will set flag1
to true
,
and flag2
to bar
. Finally, --flag1 --flag2 -- bar
will set
both configuration parameters to true
, and the bar
is taken
as a command argument.
Any environment variables that start with npm_config_
will be
interpreted as a configuration parameter. For example, putting
npm_config_foo=bar
in your environment will set the foo
configuration parameter to bar
. Any environment configurations that
are not given a value will be given the value of true
. Config
values are case-insensitive, so NPM_CONFIG_FOO=bar
will work the
same. However, please note that inside npm-scripts
npm will set its own environment variables and Node will prefer
those lowercase versions over any uppercase ones that you might set.
For details see this issue.
Notice that you need to use underscores instead of dashes, so --allow-same-version
would become npm_config_allow_same_version=true
.
The four relevant files are:
/path/to/my/project/.npmrc
)$HOME/.npmrc
; configurable via CLI
option --userconfig
or environment variable $NPM_CONFIG_USERCONFIG
)$PREFIX/etc/npmrc
; configurable via
CLI option --globalconfig
or environment variable $NPM_CONFIG_GLOBALCONFIG
)/path/to/npm/npmrc
)See npmrc(5) for more details.
Run npm config ls -l
to see a set of configuration parameters that are
internal to npm, and are defaults if nothing else is specified.
The following shorthands are parsed on the command-line:
-v
: --version
-h
, -?
, --help
, -H
: --usage
-s
, --silent
: --loglevel silent
-q
, --quiet
: --loglevel warn
-d
: --loglevel info
-dd
, --verbose
: --loglevel verbose
-ddd
: --loglevel silly
-g
: --global
-C
: --prefix
-l
: --long
-m
: --message
-p
, --porcelain
: --parseable
-reg
: --registry
-f
: --force
-desc
: --description
-S
: --save
-P
: --save-prod
-D
: --save-dev
-O
: --save-optional
-B
: --save-bundle
-E
: --save-exact
-y
: --yes
-n
: --yes false
ll
and la
commands: ls --long
If the specified configuration param resolves unambiguously to a known configuration parameter, then it is expanded to that configuration parameter. For example:
npm ls --par
# same as:
npm ls --parseable
If multiple single-character shorthands are strung together, and the resulting combination is unambiguously not some other configuration param, then it is expanded to its various component pieces. For example:
npm ls -gpld
# same as:
npm ls --global --parseable --long --loglevel info
When running scripts (see npm-scripts(7)
) the package.json "config"
keys are overwritten in the environment if there is a config param of
<name>[@<version>]:<key>
. For example, if the package.json has
this:
{ "name" : "foo"
, "config" : { "port" : "8080" }
, "scripts" : { "start" : "node server.js" } }
and the server.js is this:
http.createServer(...).listen(process.env.npm_package_config_port)
then the user could change the behavior by doing:
npm config set foo:port 80
See package.json(5) for more information.
restricted
When publishing scoped packages, the access level defaults to restricted
. If
you want your scoped package to be publicly viewable (and installable) set
--access=public
. The only valid values for access
are public
and
restricted
. Unscoped packages always have an access level of public
.
Prevents throwing an error when npm version
is used to set the new version
to the same value as the current version.
Force npm to always require authentication when accessing the registry,
even for GET
requests.
When "dev" or "development" and running local npm shrinkwrap
,
npm outdated
, or npm update
, is an alias for --dev
.
When "true" submit audit reports alongside npm install
runs to the default
registry and all registries configured for scopes. See the documentation
for npm-audit(1) for details on what is submitted.
"low"
'low'
, 'moderate'
, 'high'
, 'critical'
The minimum level of vulnerability for npm audit
to exit with
a non-zero exit code.
'legacy'
'legacy'
, 'sso'
, 'saml'
, 'oauth'
What authentication strategy to use with adduser
/login
.
true
Tells npm to create symlinks (or .cmd
shims on Windows) for package
executables.
Set to false to have it not do this. This can be used to work around the fact that some file systems don't support symlinks, even on ostensibly Unix systems.
"open"
, Windows: "start"
, Others: "xdg-open"
The browser that is called by the npm docs
command to open websites.
The Certificate Authority signing certificate that is trusted for SSL connections to the registry. Values should be in PEM format (Windows calls it "Base-64 encoded X.509 (.CER)") with newlines replaced by the string "\n". For example:
ca="-----BEGIN CERTIFICATE-----\nXXXX\nXXXX\n-----END CERTIFICATE-----"
Set to null
to only allow "known" registrars, or to a specific CA cert
to trust only that specific signing authority.
Multiple CAs can be trusted by specifying an array of certificates:
ca[]="..."
ca[]="..."
See also the strict-ssl
config.
null
A path to a file containing one or multiple Certificate Authority signing
certificates. Similar to the ca
setting, but allows for multiple CA's, as
well as for the CA information to be stored in a file on disk.
%AppData%\npm-cache
, Posix: ~/.npm
The location of npm's cache directory. See npm-cache(1)
The number of ms before cache folder lockfiles are considered stale.
Number of times to retry to acquire a lock on cache folder lockfiles.
Number of ms to wait for cache lock files to expire.
DEPRECATED: This option has been deprecated in favor of --prefer-online
.
--cache-max=0
is an alias for --prefer-online
.
DEPRECATED: This option has been deprecated in favor of --prefer-offline
.
--cache-min=9999 (or bigger)
is an alias for --prefer-offline
.
null
A client certificate to pass when accessing the registry. Values should be in PEM format (Windows calls it "Base-64 encoded X.509 (.CER)") with newlines replaced by the string "\n". For example:
cert="-----BEGIN CERTIFICATE-----\nXXXX\nXXXX\n-----END CERTIFICATE-----"
It is not the path to a certificate file (and there is no "certfile" option).
null
This is a list of CIDR address to be used when configuring limited access tokens with the npm token create
command.
"always"
If false, never shows colors. If "always"
then always shows colors.
If true, then only prints color codes for tty file descriptors.
This option can also be changed using the environment: colors are
disabled when the environment variable NO_COLOR
is set to any value.
The depth to go when recursing directories for npm ls
,
npm cache ls
, and npm outdated
.
For npm outdated
, a setting of Infinity
will be treated as 0
since that gives more useful information. To show the outdated status
of all packages and dependents, use a large integer value,
e.g., npm outdated --depth 9999
Show the description in npm search
Install dev-dependencies
along with packages.
Indicates that you don't want npm to make any changes and that it should
only report what it would have done. This can be passed into any of the
commands that modify your local installation, eg, install
, update
,
dedupe
, uninstall
. This is NOT currently honored by some network related
commands, eg dist-tags
, owner
, etc.
EDITOR
environment variable if set, or "vi"
on Posix,
or "notepad"
on Windows.The command to run for npm edit
or npm config edit
.
If set to true, then npm will stubbornly refuse to install (or even consider installing) any package that claims to not be compatible with the current Node.js version.
Makes various commands more forceful.
The "retries" config for the retry
module to use when fetching
packages from the registry.
The "factor" config for the retry
module to use when fetching
packages.
The "minTimeout" config for the retry
module to use when fetching
packages.
The "maxTimeout" config for the retry
module to use when fetching
packages.
"git"
The command to use for git commands. If git is installed on the
computer, but is not in the PATH
, then set this to the full path to
the git binary.
true
Tag the commit when using the npm version
command.
true
Run git commit hooks when using the npm version
command.
Operates in "global" mode, so that packages are installed into the
prefix
folder instead of the current working directory. See
npm-folders(5)
for more on the differences in behavior.
{prefix}/lib/node_modules
folder, instead of the
current working directory.{prefix}/bin
{prefix}/share/man
The config file to read for global config options.
Causes npm to install the package into your local node_modules
folder with
the same layout it uses with the global node_modules
folder. Only your
direct dependencies will show in node_modules
and everything they depend
on will be flattened in their node_modules
folders. This obviously will
eliminate some deduping. If used with legacy-bundling
, legacy-bundling
will be
preferred.
The group to use when running package scripts in global mode as the root user.
"npm"
The string that starts all the debugging log output.
A proxy to use for outgoing https requests. If the HTTPS_PROXY
or
https_proxy
or HTTP_PROXY
or http_proxy
environment variables are set,
proxy settings will be honored by the underlying request
library.
If true, npm will not exit with an error code when run-script
is invoked for
a script that isn't defined in the scripts
section of package.json
. This
option can be used when it's desirable to optionally run a script when it's
present and fail if the script fails. This is useful, for example, when running
scripts that may only apply for some builds in an otherwise generic CI setup.
If true, npm will not run prepublish
scripts.
If true, npm does not run scripts specified in package.json files.
A module that will be loaded by the npm init
command. See the
documentation for the
init-package-json module
for more information, or npm-init(1).
The value npm init
should use by default for the package author's name.
The value npm init
should use by default for the package author's email.
The value npm init
should use by default for the package author's homepage.
The value npm init
should use by default for the package license.
The value that npm init
should use by default for the package
version number, if not already set in package.json.
Whether or not to output JSON data, rather than the normal output.
This feature is currently experimental, and the output data structures for many
commands is either not implemented in JSON yet, or subject to change. Only the
output from npm ls --json
and npm search --json
are currently valid.
null
A client key to pass when accessing the registry. Values should be in PEM format with newlines replaced by the string "\n". For example:
key="-----BEGIN PRIVATE KEY-----\nXXXX\nXXXX\n-----END PRIVATE KEY-----"
It is not the path to a key file (and there is no "keyfile" option).
Causes npm to install the package such that versions of npm prior to 1.4,
such as the one included with node 0.8, can install the package. This
eliminates all automatic deduping. If used with global-style
this option
will be preferred.
If true, then local installs will link if there is a suitable globally installed package.
Note that this means that local installs can cause things to be installed into the global space at the same time. The link is only done if one of the two conditions are met:
The IP address of the local interface to use when making connections to the npm registry. Must be IPv4 in versions of Node prior to 0.12.
What level of logs to report. On failure, all logs are written to
npm-debug.log
in the current working directory.
Any logs of a higher level than the setting are shown. The default is "notice".
This is the stream that is passed to the npmlog module at run time.
It cannot be set from the command line, but if you are using npm programmatically, you may wish to send logs to somewhere other than stderr.
If the color
config is set to true, then this stream will receive
colored output if it is a TTY.
The maximum number of log files to store.
Show extended information in npm ls
and npm search
.
The maximum number of connections to use per origin (protocol/host/port
combination). Passed to the http
Agent
used to make the request.
Commit message which is used by npm version
when creating version commit.
Any "%s" in the message will be replaced with the version number.
registry
(which defaults to "https://registry.npmjs.org/")The registry you want to send cli metrics to if send-metrics
is true.
Options to pass through to Node.js via the NODE_OPTIONS
environment
variable. This does not impact how npm itself is executed but it does
impact how lifecycle scripts are called.
The node version to use when checking a package's engines
map.
A comma-separated string or an array of domain extensions that a proxy should not be used for.
Force offline mode: no network requests will be done during install. To allow
the CLI to fill in missing cache data, see --prefer-offline
.
A node module to require()
when npm loads. Useful for programmatic
usage.
When "dev" or "development" and running local npm install
without any
arguments, only devDependencies (and their dependencies) are installed.
When "dev" or "development" and running local npm ls
, npm outdated
, or
npm update
, is an alias for --dev
.
When "prod" or "production" and running local npm install
without any
arguments, only non-devDependencies (and their dependencies) are
installed.
When "prod" or "production" and running local npm ls
, npm outdated
, or
npm update
, is an alias for --production
.
Attempt to install packages in the optionalDependencies
object. Note
that if these packages fail to install, the overall installation
process is not aborted.
This is a one-time password from a two-factor authenticator. It's needed
when publishing or changing package permissions with npm access
.
If set to false, then ignore package-lock.json
files when installing. This
will also prevent writing package-lock.json
if save
is true.
When package package-locks are disabled, automatic pruning of extraneous
modules will also be disabled. To remove extraneous modules with
package-locks disabled use npm prune
.
This option is an alias for --shrinkwrap
.
If set to true, it will update only the package-lock.json
,
instead of checking node_modules
and downloading dependencies.
Output parseable results from commands that write to
standard output. For npm search
, this will be tab-separated table format.
If true, staleness checks for cached data will be bypassed, but missing data
will be requested from the server. To force full offline mode, use --offline
.
This option is effectively equivalent to --cache-min=9999999
.
If true, staleness checks for cached data will be forced, making the CLI look for updates immediately even for fresh package data.
The location to install global items. If set on the command line, then it forces non-global commands to run in the specified folder.
The "prerelease identifier" to use as a prefix for the "prerelease" part of a
semver. Like the rc
in 1.2.0-rc.8
.
Set to true to run in "production" mode.
npm install
without any arguments.When set to true
, npm will display a progress bar during time intensive
operations, if process.stderr
is a TTY.
Set to false
to suppress the progress bar.
A proxy to use for outgoing http requests. If the HTTP_PROXY
or
http_proxy
environment variables are set, proxy settings will be
honored by the underlying request
library.
This is used to mark a token as unable to publish when configuring limited access tokens with the npm token create
command.
Rebuild bundled dependencies after installation.
The base URL of the npm package registry.
Remove failed installs.
Save installed packages to a package.json file as dependencies.
When used with the npm rm
command, it removes it from the dependencies
object.
Only works if there is already a package.json file present.
If a package would be saved at install time by the use of --save
,
--save-dev
, or --save-optional
, then also put it in the
bundleDependencies
list.
When used with the npm rm
command, it removes it from the
bundledDependencies list.
Makes sure that a package will be saved into dependencies
specifically. This
is useful if a package already exists in devDependencies
or
optionalDependencies
, but you want to move it to be a production dep. This is
also the default behavior if --save
is true, and neither --save-dev
or
--save-optional
are true.
Save installed packages to a package.json file as devDependencies
.
When used with the npm rm
command, it removes it from the
devDependencies
object.
Only works if there is already a package.json file present.
Dependencies saved to package.json using --save
, --save-dev
or
--save-optional
will be configured with an exact version rather than
using npm's default semver range operator.
Save installed packages to a package.json file as optionalDependencies.
When used with the npm rm
command, it removes it from the
devDependencies
object.
Only works if there is already a package.json file present.
Configure how versions of packages installed to a package.json file via
--save
or --save-dev
get prefixed.
For example if a package has version 1.2.3
, by default its version is
set to ^1.2.3
which allows minor upgrades for that package, but after
npm config set save-prefix='~'
it would be set to ~1.2.3
which only allows
patch upgrades.
Associate an operation with a scope for a scoped registry. Useful when logging
in to a private registry for the first time:
npm login --scope=@organization --registry=registry.organization.com
, which
will cause @organization
to be mapped to the registry for future installation
of packages specified according to the pattern @organization/package
.
null
The shell to use for scripts run with the npm run
command.
"auto"
or "warn-only"
If set to true
, add the directory in which the current node
executable
resides to the PATH
environment variable when running scripts,
even if that means that npm
will invoke a different node
executable than
the one which it is running.
If set to false
, never modify PATH
with that.
If set to "warn-only"
, never modify PATH
but print a warning if npm
thinks
that you may want to run it with true
, e.g. because the node
executable
in the PATH
is not the one npm
was invoked with.
If set to auto
, only add that directory to the PATH
environment variable
if the node
executable with which npm
was invoked and the one that is found
first on the PATH
are different.
Space-separated options that limit the results from search.
Space-separated options that are always passed to search.
Number of items to limit search results to. Will not apply at all to legacy searches.
The age of the cache, in seconds, before another registry request is made if using legacy search endpoint.
If true, success/failure metrics will be reported to the registry stored in
metrics-registry
. These requests contain the number of successful and
failing runs of the npm CLI and the time period overwhich those counts were
gathered. No identifying information is included in these requests.
The shell to run for the npm explore
command.
If set to false, then ignore npm-shrinkwrap.json
files when installing. This
will also prevent writing npm-shrinkwrap.json
if save
is true.
This option is an alias for --package-lock
.
If set to true, then the npm version
command will commit the new package
version using -S
to add a signature.
Note that git requires you to have set up GPG keys in your git configs for this to work properly.
If set to true, then the npm version
command will tag the version
using -s
to add a signature.
Note that git requires you to have set up GPG keys in your git configs for this to work properly.
When used with SSO-enabled auth-type
s, configures how regularly the registry
should be polled while the user is completing authentication.
If --auth-type=sso
, the type of SSO type to use.
Whether or not to do SSL key validation when making requests to the registry via https.
See also the ca
config.
If you ask npm to install a package and don't tell it a specific version, then it will install the specified tag.
Also the tag that is added to the package@version specified by the npm tag
command, if no explicit tag is given.
"v"
If set, alters the prefix used when tagging a new version when performing a
version increment using npm-version
. To remove the prefix altogether, set it
to the empty string: ""
.
Because other tools may rely on the convention that npm version tags look like
v1.0.0
, only use this property if it is absolutely necessary. In
particular, use care when overriding this setting for public packages.
false
If true, writes an npm-debug
log to _logs
and timing information to
_timing.json
, both in your cache. _timing.json
is a newline delimited
list of JSON objects. You can quickly view it with this
json command line:
json -g < ~/.npm/_timing.json
.
Where to store temporary files and folders. All temp files are deleted on success, but left behind on failure for forensic purposes.
When set to true, npm uses unicode characters in the tree output. When false, it uses ascii characters to draw trees.
Set to true to suppress the UID/GID switching when running package scripts. If set explicitly to false, then installing as a non-root user will fail.
Set to false to suppress the update notification when using an older version of npm than the latest.
Set to show short usage output (like the -H output)
instead of complete help when doing npm-help(1)
.
The UID to set to when running package scripts as root.
The location of user-level configuration settings.
The "umask" value to use when setting the file creation mode on files and folders.
Folders and executables are given a mode which is 0777
masked against
this value. Other files are given a mode which is 0666
masked against
this value. Thus, the defaults are 0755
and 0644
respectively.
Sets a User-Agent to the request header
If true, output the npm version and exit successfully.
Only relevant when specified explicitly on the command line.
If true, output the npm version as well as node's process.versions
map, and
exit successfully.
Only relevant when specified explicitly on the command line.
The program to use to view help content.
Set to "browser"
to view html help content in the default web browser.