openbsd, not netbsd

src/etc/etc.sparc/README

@@ -1,16 +1,11 @@
-# $Id: README,v 1.1.1.1 1995/10/18 08:38:01 deraadt Exp $
+# $Id: README,v 1.2 1995/11/08 07:12:52 deraadt Exp $
 
-Initial test versions of a NetBSD/sparc binaries install are available
+Initial test versions of a OpenBSD/sparc binaries install are available
 at
-	ftp.iastate.edu:/pub/netbsd/NetBSD-current/binaries/sparc
-	sun-lamp.cs.berkeley.edu:pub/NetBSD/arch/sparc
-	ftp.wonderland.org:NetBSD/arch/sparc		[UK]
-	ftp.informatik.tu-muenchen.de:\
-	    /pub/comp/os/bsd/NetBSD/NetBSD-current/binaries/sparc
-and many other NetBSD mirror sites. Some mirror sites may take a day
-or two to catch up.
-
-The NetBSD/sparc port runs on sun4c class machines, ie. the
+	ftp.openbsd.org:/pub/OpenBSD/snapshots/sparc
+Some mirror sites may take a day or two to catch up.
+
+The OpenBSD/sparc port runs on sun4c class machines, ie. the
 SS 1, 1+, 2, IPC, IPX, SLC, and ELC. it does not run on the
 server-series machines, or the SS10-series machines.
 
@@ -21,7 +16,7 @@ NOTE: THESE INSTRUCTIONS MAY CHANGE WITH EACH SNAPSHOT.
 
 Until there are better instructions written, here's a rough idea:
 
-1.  format and partition the disk using sunos. yup, NetBSD/sparc uses
+1.  format and partition the disk using sunos. yup, OpenBSD/sparc uses
     sunos disk labels. i am running a quantum 105 with these partition
     sizes:
     a:    28140        0    4.2BSD     1024  8192    16   # (Cyl.    0 - 133)
@@ -39,9 +34,9 @@ Until there are better instructions written, here's a rough idea:
 
 2.  newfs it using sunos. yup, the filesystem format is identical.
     UFS hasn't changed much over the years. (If you can, there is
-    a performance benefit from newfs'ing using NetBSD.)
+    a performance benefit from newfs'ing using OpenBSD.)
 
-    If you newfs using the NetBSD newfs command, be sure to use -O
+    If you newfs using the OpenBSD newfs command, be sure to use -O
     to specify the `4.3BSD filesystem format' for your / partition,
     otherwise you will not be able to boot. The SunOS boot blocks do
     not understand the extended 4.4 filesystem format.
@@ -49,7 +44,7 @@ Until there are better instructions written, here's a rough idea:
 3.  put a SunOS /boot program in the root partition, and use
     "installboot" to cause it to work. the "installboot" man page
     says to do something like this: say you are running SunOS, and
-    the drive you are installing NetBSD/sparc on is currently at
+    the drive you are installing OpenBSD/sparc on is currently at
     /dev/sd1. You have made the filesystems on that drive already.
 	# mount /dev/sd1a /mnt
 	# cp /boot /mnt/boot
@@ -66,22 +61,22 @@ Until there are better instructions written, here's a rough idea:
 5.  copy /mnt/etc/fstab.sd to /mnt/etc/fstab and edit to match your
     disk layout.
 
-6.  the install script copies the kernel called "netbsd.scsi3" to
-    /mnt/netbsd. Two sample kernels are supplied: "netbsd" and
-    "netbsd.scsi3".
+6.  the install script copies the kernel called "bsd.scsi3" to
+    /mnt/bsd. Two sample kernels are supplied: "bsd" and
+    "bsd.scsi3".
 
-    Unlike SunOS and the ROM, NetBSD numbers scsi drives sequentially
+    Unlike SunOS and the ROM, OpenBSD numbers scsi drives sequentially
     as it finds them. The drive with the lowest scsi-id will be called
     sd0.  SunOS and the ROM map normally map sd0 to scsi-id 3. Thus, if
-    you have two drives, it's quite likely that NetBSD will disagree with
+    you have two drives, it's quite likely that OpenBSD will disagree with
     the ROM.
 
-    The "netbsd.scsi3" kernel gets around this problem, by hard-wiring
+    The "bsd.scsi3" kernel gets around this problem, by hard-wiring
     scsi-id#3 to sd0. The remaining drives will be dynamically mapped
     to other sd* numbers.  If you have more than one drive you will
     want to use this kernel.
 
-    the "netbsd" kernel expects your root drive to be at the standard
+    the "bsd" kernel expects your root drive to be at the standard
     SunOS sd0==scsi-id#3 location. If you have a second drive at any
     of scsi-id's 0, 1, or 2, this kernel will NOT work for you. If you
     know what you are doing, you could use this kernel.
@@ -91,7 +86,7 @@ Until there are better instructions written, here's a rough idea:
         >n
         ok setenv sunmon-compat? false
         ok
-    this is needed because netbsd cannot handle the old-mode yet,
+    this is needed because bsd cannot handle the old-mode yet,
     and will firework on you.
 
     you cannot use the security modes of the sparc ROM. sorry, same
@@ -100,14 +95,14 @@ Until there are better instructions written, here's a rough idea:
 
 8.  if needed, swap your scsi id's. now try a reboot. initially I'd
     suggest you boot "-bs", then try multiuser after that. if you boot
-    single-user the netbsd incantation for making root read-write
+    single-user the bsd incantation for making root read-write
     is "mount -u /dev/sd0a /". alternatively, the command reboot is
     found in /sbin.
 
-9.  to boot from netbsd by default, tell something like this to your
+9.  to boot from bsd by default, tell something like this to your
     ROM.
 	>n
-	ok setenv boot-from sd(0,0,0)netbsd
+	ok setenv boot-from sd(0,0,0)bsd
 	ok
 
 please let me know of any errors in these instructions or in the
@@ -115,4 +110,4 @@ archives. if so i'll correct them.
 
 good luck.
 
-<deraadt@fsa.ca>
+<deraadt@openbsd.org>

src/etc/etc.sparc/install.sh

@@ -1,5 +1,5 @@
 #!/bin/sh
-# $Id: install.sh,v 1.1.1.1 1995/10/18 08:38:02 deraadt Exp $
+# $Id: install.sh,v 1.2 1995/11/08 07:12:53 deraadt Exp $
 umask 0
 cat ./bin.tar.gz | gzip -d | (cd /mnt; tar xvpf -)
 cat ./etc.tar.gz | gzip -d | (cd /mnt; tar xvpf -)
@@ -14,7 +14,7 @@ cat ./usr.sbin.tar.gz | gzip -d | (cd /mnt; tar xvpf -)
 cat ./usr.share.tar.gz | gzip -d | (cd /mnt; tar xvpf -)
 cat ./var.tar.gz | gzip -d | (cd /mnt; tar xvpf -)
 cat ./dev.tar.gz | gzip -d | (cd /mnt; tar xvpf -)
-cp ./netbsd.scsi3 /mnt/netbsd
-chmod 640 /mnt/netbsd; chown root.kmem /mnt/netbsd
+cp ./bsd.scsi3 /mnt/bsd
+chmod 640 /mnt/bsd; chown root.kmem /mnt/bsd
 cd /mnt/dev; ./MAKEDEV all
 mv /mnt/etc/fstab.sd /mnt/etc/fstab