hppa reverse-stack gives us a valuable test case, but most developers don't have a 2nd one to proceed further with this. ok kettenisOPENBSD_6_0
@ -1,512 +0,0 @@ | |||
#!/bin/sh - | |||
# | |||
# THIS FILE AUTOMATICALLY GENERATED. DO NOT EDIT. | |||
# generated from: | |||
# | |||
# OpenBSD: etc.hppa64/MAKEDEV.md,v 1.33 2016/04/25 20:38:10 tedu Exp | |||
# OpenBSD: MAKEDEV.common,v 1.86 2016/04/25 20:39:42 tedu Exp | |||
# OpenBSD: MAKEDEV.mi,v 1.82 2016/03/12 17:58:59 espie Exp | |||
# OpenBSD: MAKEDEV.sub,v 1.14 2005/02/07 06:14:18 david Exp | |||
# | |||
# | |||
# Copyright (c) 2001-2004 Todd T. Fries <todd@OpenBSD.org> | |||
# | |||
# Permission to use, copy, modify, and distribute this software for any | |||
# purpose with or without fee is hereby granted, provided that the above | |||
# copyright notice and this permission notice appear in all copies. | |||
# | |||
# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |||
# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |||
# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |||
# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |||
# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |||
# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |||
# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |||
# | |||
# Device "make" file. Valid arguments: | |||
# all makes all known devices, including local devices. | |||
# Tries to make the ``standard'' number of each type. | |||
# ramdisk Ramdisk kernel devices | |||
# std Standard devices | |||
# local Configuration specific devices | |||
# Disks: | |||
# cd* ATAPI and SCSI CD-ROM drives | |||
# fd* Floppy disk drives (3 1/2", 5 1/4") | |||
# sd* SCSI disks, including flopticals | |||
# rd* "rd" pseudo-disks | |||
# vnd* "file" pseudo-disk devices | |||
# wd* "winchester" disk drives (ST506, IDE, ESDI, RLL, ...) | |||
# Tapes: | |||
# ch* SCSI media changers | |||
# st* SCSI tape drives | |||
# Terminal ports: | |||
# tty[0-7][0-9a-f] NS16x50 serial ports | |||
# Pseudo terminals: | |||
# ptm pty master device | |||
# pty* Set of 62 master pseudo terminals | |||
# tty* Set of 62 slave pseudo terminals | |||
# Console ports: | |||
# ttyC-J* wscons display devices | |||
# wscons Minimal wscons devices | |||
# wskbd* wscons keyboards | |||
# wsmux wscons keyboard/mouse mux devices | |||
# Pointing devices: | |||
# wsmouse* wscons mice | |||
# Printers: | |||
# lpt* IEEE 1284 centronics printer | |||
# USB devices: | |||
# uall All USB devices | |||
# usb* Bus control devices used by usbd for attach/detach | |||
# uhid* Generic HID devices | |||
# ugen* Generic USB devices | |||
# ulpt* Printer devices | |||
# ttyU* USB serial ports | |||
# Special purpose devices: | |||
# audio* Audio devices | |||
# bio ioctl tunnel pseudo-device | |||
# bpf Berkeley Packet Filter | |||
# diskmap Disk mapper | |||
# fd fd/* nodes | |||
# fuse Userland Filesystem | |||
# pci* PCI bus devices | |||
# pdc PDC device | |||
# pf* Packet Filter | |||
# pppx* PPP Multiplexer | |||
# *random In-kernel random data source | |||
# tun* Network tunnel driver | |||
# tap* Ethernet tunnel driver | |||
# uk* Unknown SCSI devices | |||
# video* Video V4L2 devices | |||
# vscsi* Virtual SCSI controller | |||
PATH=/sbin:/usr/sbin:/bin:/usr/bin | |||
T=$0 | |||
# set this to echo for Echo-Only debugging | |||
[ "$eo" ] || eo= | |||
hex() | |||
{ | |||
case $1 in | |||
[0-9]) echo -n $1;; | |||
10) echo -n a;; | |||
11) echo -n b;; | |||
12) echo -n c;; | |||
13) echo -n d;; | |||
14) echo -n e;; | |||
15) echo -n f;; | |||
esac | |||
} | |||
alph2d() | |||
{ | |||
local t="$1" | |||
local p="0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ" | |||
local sub=${p%${t}*} | |||
echo ${#sub} | |||
} | |||
h2d() | |||
{ | |||
local s="$1" | |||
local f=${s%*[0-9a-f]} n=${s#[0-9a-f]*} | |||
echo $(($(_h2d $f)*16+ $(_h2d $n) )) | |||
} | |||
_h2d() | |||
{ | |||
case $1 in | |||
[0-9]) echo -n $1;; | |||
a) echo -n 10;; | |||
b) echo -n 11;; | |||
c) echo -n 12;; | |||
d) echo -n 13;; | |||
e) echo -n 14;; | |||
f) echo -n 15;; | |||
esac | |||
} | |||
unt() | |||
{ | |||
# XXX pdksh can't seem to deal with locally scoped variables | |||
# in ${foo#$bar} expansions | |||
arg="$1" | |||
tmp="${arg#[a-zA-Z]*}" | |||
tmp="${tmp%*[a-zA-Z]}" | |||
while [ "$tmp" != "$arg" ] | |||
do | |||
arg=$tmp | |||
tmp="${arg#[a-zA-Z]*}" | |||
tmp="${tmp%*[a-zA-Z]}" | |||
done | |||
echo $arg | |||
} | |||
dodisk() | |||
{ | |||
[ "$DEBUG" ] && set -x | |||
n=$(($((${5}*${7:-16}))+${6})) count=0 | |||
[ 0$7 -ne 8 ] && l="i j k l m n o p" | |||
for d in a b c d e f g h $l | |||
do | |||
M $1$2$d b $3 $(($n+$count)) 640 operator | |||
M r$1$2$d c $4 $(($n+$count)) 640 operator | |||
let count=count+1 | |||
done | |||
} | |||
dodisk2() | |||
{ | |||
n=$(($(($5*${7:-16}))+$6)) | |||
M $1$2a b $3 $n 640 operator | |||
M r$1$2a c $4 $n 640 operator | |||
n=$(($n+2)) | |||
M $1$2c b $3 $n 640 operator | |||
M r$1$2c c $4 $n 640 operator | |||
} | |||
# M name b/c major minor [mode] [group] | |||
RMlist[0]="rm -f" | |||
mkl() { | |||
: ${mklist[0]:=";mknod"} | |||
mklist[${#mklist[*]}]=" -m $1 $2 $3 $4 $5" | |||
} | |||
M() { | |||
RMlist[${#RMlist[*]}]=$1 | |||
mkl ${5-666} $1 $2 $3 $4 | |||
G=${6:-wheel} | |||
[ "$7" ] && { | |||
MKlist[${#MKlist[*]}]="&& chown $7:$G $1" | |||
} || { | |||
case $G in | |||
wheel) | |||
[ ${#whlist[*]} = 0 ] && whlist[0]="&& chgrp wheel" | |||
whlist[${#whlist[*]}]="$1" | |||
;; | |||
operator) | |||
[ ${#oplist[*]} = 0 ] && oplist[0]="&& chgrp operator" | |||
oplist[${#oplist[*]}]="$1" | |||
;; | |||
*) | |||
MKlist[${#MKlist[*]}]="&& chgrp $G $1"; | |||
esac | |||
} | |||
return 0 | |||
} | |||
R() { | |||
[ "$DEBUG" ] && set -x | |||
for i in "$@" | |||
do | |||
U=`unt $i` | |||
[ "$U" ] || U=0 | |||
case $i in | |||
ramdisk) | |||
R std fd st0 st1 sd0 sd1 sd2 sd3 rd0 random | |||
R pty0 bpf bio diskmap | |||
;; | |||
std) | |||
M console c 0 0 600 | |||
M tty c 1 0 | |||
M mem c 2 0 640 kmem | |||
M kmem c 2 1 640 kmem | |||
M null c 2 2 | |||
M zero c 2 12 | |||
M stdin c 16 0 | |||
M stdout c 16 1 | |||
M stderr c 16 2 | |||
M ksyms c 25 0 640 kmem | |||
M klog c 6 0 600 | |||
M pdc c 22 0 640 operator | |||
;; | |||
vscsi*) | |||
M vscsi$U c 54 $U 600 | |||
;; | |||
video*) | |||
M video$U c 33 $U | |||
MKlist[${#MKlist[*]}]=";[ -e video ] || ln -s video$U video" | |||
;; | |||
uk*) | |||
M uk$U c 15 $U 640 operator | |||
;; | |||
tap*) | |||
M tap$U c 59 $U 600 | |||
;; | |||
tun*) | |||
M tun$U c 18 $U 600 | |||
;; | |||
*random) | |||
n=0 | |||
for pre in " " s u a | |||
do | |||
M ${pre}random c 20 $n 644 | |||
n=$(($n+1)) | |||
done | |||
;; | |||
pppx*) | |||
M pppx$U c 57 $U 600 | |||
;; | |||
pf*) | |||
M pf c 21 0 600 | |||
;; | |||
pci*) | |||
M pci$U c 31 $U 600 | |||
MKlist[${#MKlist[*]}]=";[ -h pci ] || ln -sf pci0 pci" | |||
;; | |||
fuse) | |||
M fuse$U c 58 $U 600 | |||
;; | |||
fd) | |||
RMlist[${#RMlist[*]}]=";mkdir -p fd;rm -f" n=0 | |||
while [ $n -lt 64 ];do M fd/$n c 16 $n;n=$(($n+1));done | |||
MKlist[${#MKlist[*]}]=";chmod 555 fd" | |||
;; | |||
diskmap) | |||
M diskmap c 56 0 640 operator | |||
;; | |||
bpf) | |||
M bpf c 17 0 600 | |||
M bpf0 c 17 0 600 | |||
;; | |||
bio) | |||
M bio c 37 0 600 | |||
;; | |||
audio*) | |||
M sound$U c 35 $U | |||
M mixer$U c 35 $(($U+16)) | |||
M audio$U c 35 $(($U+128)) | |||
M audioctl$U c 35 $(($U+192)) | |||
MKlist[${#MKlist[*]}]=";[ -e audio ] || ln -s audio$U audio" | |||
MKlist[${#MKlist[*]}]=";[ -e mixer ] || ln -s mixer$U mixer" | |||
MKlist[${#MKlist[*]}]=";[ -e sound ] || ln -s sound$U sound" | |||
MKlist[${#MKlist[*]}]=";[ -e audioctl ] || ln -s audioctl$U audioctl" | |||
;; | |||
ttyU[0-9a-zA-Z]) | |||
U=${i#ttyU*} | |||
o=$(alph2d $U) | |||
M ttyU$U c 45 $o 660 dialer uucp | |||
M cuaU$U c 45 $(($o+128)) 660 dialer uucp | |||
;; | |||
ulpt*) | |||
M ulpt$U c 43 $U 660 | |||
;; | |||
ugen*) | |||
n=$(($U*16)) | |||
for j in 0{0,1,2,3,4,5,6,7,8,9} 1{0,1,2,3,4,5} | |||
do | |||
M ugen$U.$j c 42 $(($n+10#$j)) 660 | |||
done | |||
;; | |||
uhid*) | |||
M uhid$U c 41 $U 660 | |||
;; | |||
usb*) | |||
[ "$i" = "usb" ] && u= || u=$U | |||
M usb$u c 40 $U 660 | |||
;; | |||
uall) | |||
R ttyU0 ttyU1 ttyU2 ttyU3 ugen0 ugen1 ugen2 ugen3 ugen4 ugen5 | |||
R ugen6 ugen7 ulpt0 ulpt1 uhid0 uhid1 uhid2 uhid3 usb0 usb1 | |||
R usb2 usb3 usb4 usb5 usb6 usb7 | |||
;; | |||
lpt*|lpa*) | |||
case $i in | |||
lpt*) n=lpt f=0;; | |||
lpa*) n=lpa f=128;; | |||
esac | |||
M $n$U c 26 $(($U+$f)) 600 | |||
;; | |||
wsmouse[0-9]*) | |||
M wsmouse$U c 29 $U 600 | |||
;; | |||
wsmux|wsmouse|wskbd) | |||
M wsmouse c 30 0 600 | |||
M wskbd c 30 1 600 | |||
;; | |||
wskbd[0-9]*) | |||
M wskbd$U c 28 $U 600 | |||
;; | |||
wscons) | |||
R wsmouse0 wsmouse1 wsmouse2 wsmouse3 wskbd0 wskbd1 wskbd2 | |||
R wskbd3 wsmux ttyCcfg ttyC0 ttyC1 ttyC2 ttyC3 ttyC4 ttyC5 | |||
R ttyC6 ttyC7 ttyC8 ttyC9 ttyCa ttyCb | |||
;; | |||
tty[C-J]*) | |||
U=${i##tty[C-J]} | |||
case $i in | |||
ttyC*) n=C m=0;; | |||
ttyD*) n=D m=256;; | |||
ttyE*) n=E m=512;; | |||
ttyF*) n=F m=768;; | |||
ttyG*) n=G m=1024;; | |||
ttyH*) n=H m=1280;; | |||
ttyI*) n=I m=1536;; | |||
ttyJ*) n=J m=1792;; | |||
esac | |||
case $U in | |||
[0-9a-f]) M tty$n$U c 27 $((16#$U+$m)) 600;; | |||
cfg) M tty${n}cfg c 27 $((255+$m)) 600;; | |||
*) echo bad unit $U for $i; exit 1;; | |||
esac | |||
;; | |||
pty*) | |||
if [ $U -gt 15 ]; then | |||
echo bad unit for pty in: $i | |||
continue | |||
fi | |||
set -A letters p q r s t u v w x y z P Q R S T | |||
set -A suffixes 0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p q \ | |||
r s t u v w x y z A B C D E F G H I J K L M N O P Q R S T U V W X \ | |||
Y Z | |||
name=${letters[$U]} | |||
n=0 | |||
while [ $n -lt 62 ] | |||
do | |||
nam=$name${suffixes[$n]} | |||
off=$(($U*62)) | |||
M tty$nam c 4 $(($off+$n)) | |||
M pty$nam c 5 $(($off+$n)) | |||
n=$(($n+1)) | |||
done | |||
;; | |||
ptm) | |||
M ptm c 38 0 666 | |||
;; | |||
tty[0-7][0-9a-f]) | |||
U=${i#tty*} | |||
o=$(h2d $U) | |||
M tty$U c 23 $o 660 dialer uucp | |||
M cua$U c 23 $(($o+128)) 660 dialer uucp | |||
;; | |||
st*) | |||
n=$(($U*16)) | |||
for pre in " " n e en | |||
do | |||
M ${pre}st$U b 5 $n 660 operator | |||
M ${pre}rst$U c 11 $n 660 operator | |||
n=$(($n+1)) | |||
done | |||
;; | |||
ch*) | |||
M ch$U c 13 $U 660 operator | |||
;; | |||
vnd*) | |||
dodisk vnd $U 2 8 $U 0 | |||
;; | |||
rd*) | |||
dodisk2 rd $U 3 9 $U 0 | |||
;; | |||
fd*) | |||
typnam=$U${i#fd[01]*} | |||
case $typnam in | |||
0|1) typnum=0;; # no type specified, assume A | |||
*A) typnum=0; typnam=0;; | |||
*B) typnum=1;; | |||
*C) typnum=2;; | |||
*D) typnum=3;; | |||
*E) typnum=4;; | |||
*F) typnum=5;; | |||
*G) typnum=6;; | |||
*H) typnum=7;; | |||
*) echo bad type $typnam for $i; exit 1;; | |||
esac | |||
case $U in | |||
0|1) blk=7; chr=24;; | |||
*) echo bad unit $U for $i; exit 1;; | |||
esac | |||
nam=fd${typnam} | |||
n=$(($(($U*128))+$(($typnum*16)))) | |||
M ${nam}a b $blk $n 640 operator | |||
M ${nam}b b $blk $(($n+1)) 640 operator | |||
M ${nam}c b $blk $(($n+2)) 640 operator | |||
M ${nam}i b $blk $(($n+8)) 640 operator | |||
M r${nam}a c $chr $n 640 operator | |||
M r${nam}b c $chr $(($n+1)) 640 operator | |||
M r${nam}c c $chr $(($n+2)) 640 operator | |||
M r${nam}i c $chr $(($n+8)) 640 operator | |||
;; | |||
cd*) | |||
dodisk2 cd $U 6 12 $U 0 | |||
;; | |||
local) | |||
test -s $T.local && sh $T.local | |||
;; | |||
all) | |||
R vnd0 vnd1 vnd2 vnd3 sd0 sd1 sd2 sd3 sd4 sd5 sd6 sd7 sd8 sd9 | |||
R cd0 cd1 rd0 tap0 tap1 tap2 tap3 tun0 tun1 tun2 tun3 bio pty0 | |||
R fd1 fd1B fd1C fd1D fd1E fd1F fd1G fd1H fd0 fd0B fd0C fd0D | |||
R fd0E fd0F fd0G fd0H diskmap vscsi0 ch0 audio0 audio1 audio2 | |||
R bpf fuse pppx ptm local wscons pci0 pci1 pci2 pci3 uall | |||
R video0 video1 uk0 random lpa0 lpa1 lpa2 lpt0 lpt1 lpt2 tty00 | |||
R tty01 tty02 tty03 tty04 tty05 tty06 tty07 tty08 tty09 tty0a | |||
R tty0b pf wd0 wd1 wd2 wd3 std st0 st1 fd | |||
;; | |||
wd*|sd*) | |||
case $i in | |||
wd*) dodisk wd $U 8 39 $U 0;; | |||
sd*) dodisk sd $U 4 10 $U 0;; | |||
esac | |||
;; | |||
*) | |||
echo $i: unknown device | |||
;; | |||
esac | |||
done | |||
} | |||
R "$@" | |||
{ | |||
echo -n ${RMlist[*]} | |||
echo -n ${mklist[*]} | |||
echo -n ${MKlist[*]} | |||
echo -n ${whlist[*]} | |||
echo ${oplist[*]} | |||
} | if [ "$eo" = "echo" ]; then | |||
cat | |||
else | |||
sh | |||
fi |
@ -1,106 +0,0 @@ | |||
define(MACHINE,hppa64)dnl | |||
vers(__file__, | |||
{-$OpenBSD: MAKEDEV.md,v 1.34 2016/04/28 18:17:31 natano Exp $-}, | |||
etc.MACHINE)dnl | |||
dnl | |||
dnl Copyright (c) 2001-2006 Todd T. Fries <todd@OpenBSD.org> | |||
dnl | |||
dnl Permission to use, copy, modify, and distribute this software for any | |||
dnl purpose with or without fee is hereby granted, provided that the above | |||
dnl copyright notice and this permission notice appear in all copies. | |||
dnl | |||
dnl THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |||
dnl WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |||
dnl MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |||
dnl ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |||
dnl WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |||
dnl ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |||
dnl OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |||
dnl | |||
dnl | |||
_TITLE(make) | |||
_DEV(all) | |||
_DEV(ramdisk) | |||
_DEV(std) | |||
_DEV(local) | |||
_TITLE(dis) | |||
_DEV(cd, 12, 6) | |||
_DEV(flo, 24, 7) | |||
_DEV(sd, 10, 4) | |||
_DEV(rd, 9, 3) | |||
_DEV(vnd, 8, 2) | |||
_DEV(wd, 39, 8) | |||
_TITLE(tap) | |||
_DEV(ch, 13) | |||
_DEV(st, 11, 5) | |||
_TITLE(term) | |||
_DEV(com, 23) | |||
dnl _TITLE(call) | |||
_TITLE(pty) | |||
_DEV(ptm, 38) | |||
_DEV(pty, 5) | |||
_DEV(tty, 4) | |||
_TITLE(cons) | |||
_DEV(wsdisp, 27) | |||
_DEV(wscons) | |||
_DEV(wskbd, 28) | |||
_DEV(wsmux, 30) | |||
_TITLE(point) | |||
_DEV(wsmouse, 29) | |||
_TITLE(prn) | |||
_DEV(lpt, 26) | |||
_TITLE(usb) | |||
_DEV(uall) | |||
_DEV(usb, 40) | |||
_DEV(uhid, 41) | |||
_DEV(ugen, 42) | |||
_DEV(ulpt, 43) | |||
_DEV(ttyU, 45) | |||
_TITLE(spec) | |||
_DEV(au, 35) | |||
_DEV(bio, 37) | |||
_DEV(bpf, 17) | |||
_DEV(diskmap,56) | |||
_DEV(fdesc, 16) | |||
_DEV(fuse, 58) | |||
_DEV(pci, 31) | |||
_DEV(pdc, 22) | |||
_DEV(pf, 21) | |||
_DEV(pppx,57) | |||
_DEV(rnd, 20) | |||
_DEV(tun, 18) | |||
_DEV(tap, 59) | |||
_DEV(uk, 15) | |||
_DEV(vi, 33) | |||
_DEV(vscsi, 54) | |||
dnl | |||
divert(__mddivert)dnl | |||
dnl | |||
ramdisk) | |||
_recurse std fd st0 st1 sd0 sd1 sd2 sd3 rd0 random | |||
_recurse pty0 bpf bio diskmap | |||
;; | |||
_std(1, 2, 25, 6) | |||
M pdc c 22 0 640 operator | |||
;; | |||
dnl | |||
dnl *** hppa64 specific devices | |||
dnl | |||
twrget(all, au, audio, 0, 1, 2)dnl | |||
target(all, ch, 0)dnl | |||
target(all, vscsi, 0)dnl | |||
target(all, diskmap)dnl | |||
twrget(all, flo, fd, 0, 0B, 0C, 0D, 0E, 0F, 0G, 0H)dnl | |||
twrget(all, flo, fd, 1, 1B, 1C, 1D, 1E, 1F, 1G, 1H)dnl | |||
target(all, pty, 0)dnl | |||
target(all, bio)dnl | |||
target(all, tun, 0, 1, 2, 3)dnl | |||
target(all, tap, 0, 1, 2, 3)dnl | |||
target(all, xy, 0, 1, 2, 3)dnl | |||
target(all, rd, 0)dnl | |||
target(all, cd, 0, 1)dnl | |||
target(all, sd, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9)dnl | |||
target(all, vnd, 0, 1, 2, 3)dnl | |||
target(ramd, pty, 0)dnl | |||
target(ramd, hil)dnl |
@ -1,5 +0,0 @@ | |||
# $OpenBSD: Makefile,v 1.2 2008/06/15 01:51:56 todd Exp $ | |||
all: MAKEDEV | |||
.include <bsd.prog.mk> |
@ -1,6 +0,0 @@ | |||
# $OpenBSD: Makefile.inc,v 1.8 2011/07/22 09:30:54 espie Exp $ | |||
bootblocks: | |||
cp ${DESTDIR}/usr/mdec/xxboot ${RELEASEDIR} | |||
MDEXT= bsd.rd cd${OSrev}.iso lif${OSrev}.fs xxboot |
@ -1,6 +0,0 @@ | |||
# $OpenBSD: disktab,v 1.4 2015/08/14 23:45:55 krw Exp $ | |||
rdroot|ramdiskroot|RAM-disk root FS image:\ | |||
:dt=rdroot:se#512:nc#20:nt#2:ns#128:\ | |||
:ta=4.2BSD:oa#0:pa#5120:fa#1024:ba#8192:\ | |||
:ob#0:pb#0:oc#0:pc#5120: |
@ -1 +0,0 @@ | |||
/dev/console 0600 /dev/ttyC0:/dev/wskbd:/dev/wskbd0:/dev/wsmouse:/dev/wsmouse0:/dev/ttyCcfg |
@ -1,107 +0,0 @@ | |||
# $OpenBSD: login.conf,v 1.5 2015/10/23 22:55:50 sthen Exp $ | |||
# | |||
# Sample login.conf file. See login.conf(5) for details. | |||
# | |||
# | |||
# Standard authentication styles: | |||
# | |||
# passwd Use only the local password file | |||
# chpass Do not authenticate, but change users password (change | |||
# the YP password if the user has one, else change the | |||
# local password) | |||
# lchpass Do not login; change user's local password instead | |||
# radius Use radius authentication | |||
# reject Use rejected authentication | |||
# skey Use S/Key authentication | |||
# activ ActivCard X9.9 token authentication | |||
# crypto CRYPTOCard X9.9 token authentication | |||
# snk Digital Pathways SecureNet Key authentication | |||
# tis TIS Firewall Toolkit authentication | |||
# token Generic X9.9 token authentication | |||
# yubikey YubiKey authentication | |||
# | |||
# Default allowed authentication styles | |||
auth-defaults:auth=passwd,skey: | |||
# Default allowed authentication styles for authentication type ftp | |||
auth-ftp-defaults:auth-ftp=passwd: | |||
# | |||
# The default values | |||
# To alter the default authentication types change the line: | |||
# :tc=auth-defaults:\ | |||
# to be read something like: (enables passwd, "myauth", and activ) | |||
# :auth=passwd,myauth,activ:\ | |||
# Any value changed in the daemon class should be reset in default | |||
# class. | |||
# | |||
default:\ | |||
:path=/usr/bin /bin /usr/sbin /sbin /usr/X11R6/bin /usr/local/bin /usr/local/sbin:\ | |||
:umask=022:\ | |||
:datasize-max=512M:\ | |||
:datasize-cur=512M:\ | |||
:maxproc-max=256:\ | |||
:maxproc-cur=128:\ | |||
:openfiles-cur=512:\ | |||
:stacksize-cur=4M:\ | |||
:localcipher=blowfish,8:\ | |||
:tc=auth-defaults:\ | |||
:tc=auth-ftp-defaults: | |||
# | |||
# Settings used by /etc/rc and root | |||
# This must be set properly for daemons started as root by inetd as well. | |||
# Be sure reset these values back to system defaults in the default class! | |||
# | |||
daemon:\ | |||
:ignorenologin:\ | |||
:datasize=infinity:\ | |||
:maxproc=infinity:\ | |||
:openfiles-cur=128:\ | |||
:stacksize-cur=8M:\ | |||
:localcipher=blowfish,9:\ | |||
:tc=default: | |||
# | |||
# Staff have fewer restrictions and can login even when nologins are set. | |||
# | |||
staff:\ | |||
:datasize-cur=512M:\ | |||
:datasize-max=infinity:\ | |||
:maxproc-max=512:\ | |||
:maxproc-cur=128:\ | |||
:ignorenologin:\ | |||
:requirehome@:\ | |||
:tc=default: | |||
# | |||
# Authpf accounts get a special motd and shell | |||
# | |||
authpf:\ | |||
:welcome=/etc/motd.authpf:\ | |||
:shell=/usr/sbin/authpf:\ | |||
:tc=default: | |||
# | |||
# Building ports with DPB uses raised limits | |||
# | |||
pbuild:\ | |||
:datasize-max=infinity:\ | |||
:datasize-cur=1024M:\ | |||
:maxproc-max=1024:\ | |||
:maxproc-cur=256:\ | |||
:tc=default: | |||
# | |||
# Override resource limits for certain daemons started by rc.d(8) | |||
# | |||
bgpd:\ | |||
:openfiles-cur=512:\ | |||
:tc=daemon: | |||
unbound:\ | |||
:openfiles-cur=512:\ | |||
:tc=daemon: |
@ -1 +0,0 @@ | |||
#machdep.led_blink=1 # 1=make led(s) blink |
@ -1,18 +0,0 @@ | |||
# | |||
# $OpenBSD: ttys,v 1.2 2008/01/09 17:39:42 miod Exp $ | |||
# | |||
# name getty type status comments | |||
# | |||
# If the console is marked insecure, single-user requires | |||
# the root password. | |||
console "/usr/libexec/getty std.9600" vt220 on secure | |||
ttyC0 "/usr/libexec/getty std.9600" vt220 off secure | |||
ttyD0 "/usr/libexec/getty std.9600" vt220 off secure | |||
tty00 "/usr/libexec/getty std.9600" unknown off secure | |||
tty01 "/usr/libexec/getty std.9600" unknown off secure | |||
tty02 "/usr/libexec/getty std.9600" unknown off secure | |||
tty03 "/usr/libexec/getty std.9600" unknown off secure | |||
tty04 "/usr/libexec/getty std.9600" unknown off secure | |||
tty05 "/usr/libexec/getty std.9600" unknown off secure | |||
tty06 "/usr/libexec/getty std.9600" unknown off secure | |||
tty07 "/usr/libexec/getty std.9600" unknown off secure |
@ -1,157 +0,0 @@ | |||
#include <openssl/opensslfeatures.h> | |||
/* crypto/opensslconf.h.in */ | |||
/* Generate 80386 code? */ | |||
#undef I386_ONLY | |||
#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) | |||
#define OPENSSLDIR "/etc/ssl" | |||
#endif | |||
#undef OPENSSL_UNISTD | |||
#define OPENSSL_UNISTD <unistd.h> | |||
#undef OPENSSL_EXPORT_VAR_AS_FUNCTION | |||
#if defined(HEADER_IDEA_H) && !defined(IDEA_INT) | |||
#define IDEA_INT unsigned int | |||
#endif | |||
#if defined(HEADER_MD2_H) && !defined(MD2_INT) | |||
#define MD2_INT unsigned int | |||
#endif | |||
#if defined(HEADER_RC2_H) && !defined(RC2_INT) | |||
/* I need to put in a mod for the alpha - eay */ | |||
#define RC2_INT unsigned int | |||
#endif | |||
#if defined(HEADER_RC4_H) | |||
#if !defined(RC4_INT) | |||
/* using int types make the structure larger but make the code faster | |||
* on most boxes I have tested - up to %20 faster. */ | |||
/* | |||
* I don't know what does "most" mean, but declaring "int" is a must on: | |||
* - Intel P6 because partial register stalls are very expensive; | |||
* - elder Alpha because it lacks byte load/store instructions; | |||
*/ | |||
#define RC4_INT unsigned int | |||
#endif | |||
#if !defined(RC4_CHUNK) | |||
/* | |||
* This enables code handling data aligned at natural CPU word | |||
* boundary. See crypto/rc4/rc4_enc.c for further details. | |||
*/ | |||
#undef RC4_CHUNK | |||
#endif | |||
#endif | |||
#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) | |||
/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a | |||
* %20 speed up (longs are 8 bytes, int's are 4). */ | |||
#ifndef DES_LONG | |||
#define DES_LONG unsigned int | |||
#endif | |||
#endif | |||
#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) | |||
#define CONFIG_HEADER_BN_H | |||
#undef BN_LLONG | |||
/* Should we define BN_DIV2W here? */ | |||
/* Only one for the following should be defined */ | |||
/* The prime number generation stuff may not work when | |||
* EIGHT_BIT but I don't care since I've only used this mode | |||
* for debuging the bignum libraries */ | |||
#define SIXTY_FOUR_BIT_LONG | |||
#undef SIXTY_FOUR_BIT | |||
#undef THIRTY_TWO_BIT | |||
#undef SIXTEEN_BIT | |||
#undef EIGHT_BIT | |||
#endif | |||
#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) | |||
#define CONFIG_HEADER_RC4_LOCL_H | |||
/* if this is defined data[i] is used instead of *data, this is a %20 | |||
* speedup on x86 */ | |||
#define RC4_INDEX | |||
#endif | |||
#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) | |||
#define CONFIG_HEADER_BF_LOCL_H | |||
#undef BF_PTR | |||
#endif /* HEADER_BF_LOCL_H */ | |||
#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) | |||
#define CONFIG_HEADER_DES_LOCL_H | |||
#ifndef DES_DEFAULT_OPTIONS | |||
/* the following is tweaked from a config script, that is why it is a | |||
* protected undef/define */ | |||
#ifndef DES_PTR | |||
#undef DES_PTR | |||
#endif | |||
/* This helps C compiler generate the correct code for multiple functional | |||
* units. It reduces register dependancies at the expense of 2 more | |||
* registers */ | |||
#ifndef DES_RISC1 | |||
#define DES_RISC1 | |||
#endif | |||
#ifndef DES_RISC2 | |||
#undef DES_RISC2 | |||
#endif | |||
#if defined(DES_RISC1) && defined(DES_RISC2) | |||
YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! | |||
#endif | |||
/* Unroll the inner loop, this sometimes helps, sometimes hinders. | |||
* Very mucy CPU dependant */ | |||
#ifndef DES_UNROLL | |||
#define DES_UNROLL | |||
#endif | |||
/* These default values were supplied by | |||
* Peter Gutman <pgut001@cs.auckland.ac.nz> | |||
* They are only used if nothing else has been defined */ | |||
#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) | |||
/* Special defines which change the way the code is built depending on the | |||
CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find | |||
even newer MIPS CPU's, but at the moment one size fits all for | |||
optimization options. Older Sparc's work better with only UNROLL, but | |||
there's no way to tell at compile time what it is you're running on */ | |||
#if defined( sun ) /* Newer Sparc's */ | |||
# define DES_PTR | |||
# define DES_RISC1 | |||
# define DES_UNROLL | |||
#elif defined( __ultrix ) /* Older MIPS */ | |||
# define DES_PTR | |||
# define DES_RISC2 | |||
# define DES_UNROLL | |||
#elif defined( __osf1__ ) /* Alpha */ | |||
# define DES_PTR | |||
# define DES_RISC2 | |||
#elif defined ( _AIX ) /* RS6000 */ | |||
/* Unknown */ | |||
#elif defined( __hpux ) /* HP-PA */ | |||
/* Unknown */ | |||
#elif defined( __aux ) /* 68K */ | |||
/* Unknown */ | |||
#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ | |||
# define DES_UNROLL | |||
#elif defined( __sgi ) /* Newer MIPS */ | |||
# define DES_PTR | |||
# define DES_RISC2 | |||
# define DES_UNROLL | |||
#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ | |||
# define DES_PTR | |||
# define DES_RISC1 | |||
# define DES_UNROLL | |||
#endif /* Systems-specific speed defines */ | |||
#endif | |||
#endif /* DES_DEFAULT_OPTIONS */ | |||
#endif /* HEADER_DES_LOCL_H */ |